advertisement
Chapter 3 ________________________________________________________________ Installation
Panel Mounting Frame
To enable a neat and dirt free embedded installation of the transmitter, a panel mounting frame is available as an option (Vaisala order code:
216038). The frame is a thin, flexible plastic frame for the transmitter, with adhesive tape on one side.
The frame is used to hide any rough edges of the installation hole, and provide a more finished look. Note that the panel mounting frame is not intended to bear the weight of the transmitter, and does not include any mounting supports.
Use the panel mounting frame as follows:
1. Use the frame as a template to mark the required size for the installation hole in the panel.
2. Cut the hole in the panel.
3. Mount the transmitter through the panel with suitable supports.
4. Remove the paper protecting the adhesive tape on the frame, and
attach the frame around the transmitter. Refer to Figure 16 below.
Figure 16 Panel Mounting Frame
The following numbers refer to Figure 16 above:
1 = Panel (not included)
2 = Panel mounting frame
0704-002
VAISALA ________________________________________________________________________ 33
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- High accuracy and stability
- Wide measurement range
- Modular design with interchangeable probes
- Optional heated probe for high humidity applications
- Optional filter for corrosive environments
- Optional third analog output and relays for alarm or control
Related manuals
Frequently Answers and Questions
What is the power supply requirement for HMT330?
How do I mount the HMT330 transmitter?
What is the maximum cable length that can be used with HMT330?
How do I calibrate the HMT330 transmitter?
What is the warranty period for HMT330?
advertisement