Mount the Camera. ACTi E31, E34, D42, E33, E32

Hardware Manual

Installation Procedures

Mount the Camera

Using the Bundled Bracket

1.

Mark the location of the three (3) screw holes using the bracket plate included in the package.

NOTE: Depending on the surface where you will install the camera, it may be necessary to drill the holes and use the supplied screw tox.

2.

Attach the plate to the surface using the three (3) supplied screws.

3.

Attach the bracket to the plate.

10 www.acti.com

Hardware Manual

4.

Depending on how you want to install the camera, attach the camera to the bracket through one of the two (2) holes below:

If the camera will be installed indoors and the use of sunshield is not necessary, you may also use one of the two (2) holes on top of the camera to mount the bracket to the ceiling.

First, remove the pre-installed screw nut using a wrench (not included in the package).

5.

Adjust the camera viewing angle and tighten the knob to fix the camera position.

Depending on the camera angle, you may also need to tighten the two (2) screws using the star wrench (included in the package) to fix the camera position.

11 www.acti.com

Hardware Manual

6.

Connect an Ethernet cable from the network side to the Ethernet port of the camera to

complete the installation. See Basic Connections on page 23 for more information.

Camera Side

Network Side

NOTES on using Ethernet cables: For outdoor installations, it is recommended to use exterior-grade Ethernet cables (CAT5/CAT5e/CAT6); ordinary Ethernet cables are only designed for indoor use and may deteriorate quickly when exposed to outdoor elements.

Exterior-grade Ethernet cables are waterproof and do not require a conduit.

CAUTION: If the camera will be installed outdoors, be sure to waterproof the cable connection by enclosing it inside a junction box or wrap it using a moisture-sealant tape, such as 3M PRODUCTS Core Series 4-1000 (not included in the package) or equivalent.

See example below.

For other waterproofing methods, see Waterproof Cable Installation on page 14.

12 www.acti.com