advertisement
Hardware Manual
Waterproof Cable Installation
The camera and the pre-installed network cable are resistant to salt water, weak acid, alcohol, oil, grease and other common solvents. However, in areas with fierce weather conditions and those that can easily be flooded, ensure that the exposed length of cable is also protected.
It is recommended to use a flexible conduit with 1/2” diameter and the conduit gland (included in the package) to protect the camera cabling. In this case, the pre-installed network cable with
“pigtail” (female connector) must be replaced with a standard Ethernet cable
NOTE: The flexible conduit and Ethernet cable are not included in the package and must be sold separately. When purchasing, make sure the flex conduit size is 1/2" to match the bundled conduit gland.
To do the waterproof cable installation, also prepare the following tools:
Screwdriver
Wrench
advertisement
Key Features
- 1/2.8" progressive scan CMOS sensor for high-quality images
- Powerful image processing engine for excellent color reproduction and low noise levels
- Wide dynamic range (WDR) technology for optimal image quality in challenging lighting conditions
- Motorized varifocal lens for remote adjustment of the field of view
- Built-in microphone for audio recording
- IP66-rated weatherproof housing for reliable outdoor operation
Related manuals
Frequently Answers and Questions
What are the physical dimensions of the ACTi E34 camera?
What is the maximum resolution that the ACTi E34 can record?
What is the viewing angle of the ACTi E34?
Does the ACTi E34 have night vision capabilities?
What is the maximum storage capacity of the ACTi E34?
What are the power requirements of the ACTi E34?
What is the operating temperature range of the ACTi E34?
What is the Ingress Protection (IP) rating of the ACTi E34?
advertisement