advertisement
Hardware Manual
Basic Connections
To connect the camera, you need to prepare the following:
Power over Ethernet (PoE) supported switch (to connect multiple cameras) or
PoE injector (to connect a single camera)
Ethernet cables
Connecting a Single Camera
To connect a single camera, use a PoE injector to supply both data and power to the camera using one Ethernet cable. Follow the procedures below:
1.
Connect the camera to the PoE injector using an Ethernet cable.
2.
Connect the PoE injector to the network and an AC power source.
3.
Connect a PC to the same network.
Network
Ethernet Cable
(Data)
Ethernet Cable
Power Cable
PoE Injector
Ethernet Cable
(Data + Power)
AC Power
Source
Camera
4.
After making the connections, access the cameras live view to adjust the viewing angle and focus and configure the camera settings according to your preference. See
advertisement
Key Features
- 1/2.8" progressive scan CMOS sensor for high-quality images
- Powerful image processing engine for excellent color reproduction and low noise levels
- Wide dynamic range (WDR) technology for optimal image quality in challenging lighting conditions
- Motorized varifocal lens for remote adjustment of the field of view
- Built-in microphone for audio recording
- IP66-rated weatherproof housing for reliable outdoor operation
Related manuals
Frequently Answers and Questions
What are the physical dimensions of the ACTi E34 camera?
What is the maximum resolution that the ACTi E34 can record?
What is the viewing angle of the ACTi E34?
Does the ACTi E34 have night vision capabilities?
What is the maximum storage capacity of the ACTi E34?
What are the power requirements of the ACTi E34?
What is the operating temperature range of the ACTi E34?
What is the Ingress Protection (IP) rating of the ACTi E34?
advertisement