advertisement
right page (105) of ME75 Condor FUG en, A31008-H6980-A1-1-7619 (09.11.2005, 16:25)
Extras 105
Extras
C
¢
S
¢ Select function .
SIM services (optional)
Your service provider may offer special applications such as mobile banking, share prices, etc. via the
SIM card.
If you have such a SIM card, the
SIM services will appear in the main menu under "Extras" or directly above the softkey (on the left).
Symbol for SIM services.
U
Where there are several applications, these are displayed in a SIM services menu. With the SIM services menu, your phone can support future additions in your service provider's user package. For further information, please contact your service provider.
Alarm clock
The alarm will ring at the time set by you, even when the phone is switched off.
§Edit§ Press to set.
F
Activate/deactivate the alarm.
Switch to time setting.
H
J
Set alarm call time
(hh:mm).
Switch to the week days.
H
F
Navigate to the various days.
C
Display options: alarm call time and days.
é
Alarm clock
§On§
07:30
Mo Tu We Th Fr Sa Su
Edit
¹
OK
C
Set days for alarm calls.
Press again to delete the highlighting.
Press and hold to highlight/unhighlight all the days.
Confirm setting.
§OK§
Additional information
¹
Screen display in standby mode: alarm clock activated.
With Snooze you can set the alarm to repeat.
left page (106) of ME75 Condor FUG en, A31008-H6980-A1-1-7619 (09.11.2005, 16:25)
106 Extras
C
¢
S
¢ Select function .
Sound recorder
Use the sound recorder to record noises and tones for use as ring tones. The tone recording is normally started by other applications/ functions such as "assign ring tone".
New recording
Start from main menu
C
¢
S
¢ Sound recorder or also start from another application:
<Record new>
Select.
C
The remaining time available as well as the recording time are shown in the display.
A brief tone sounds when the recording starts.
C
Pause/record alternately.
D
End recording.
The recording is saved with a timestamp in the folder Sounds . Rename with §Options§ .
If starting from another application, e.g. create MMS:
§Insert§ Transfer recording into the application.
Playback
I
C
Select the desired recording.
Playback/pause, alternately.
D
/
E
Press and hold rapid rewind and fast forward.
§Options§ Open menu.
Handsfree Playback via the built-in loudspeaker.
Set as...
Set the recording as a ringtone.
(For standard functions see page 15)
Calculator
The calculator can be used in a basic version and with an advanced range of functions. The input line and two calculation lines (including the matrice with the calculation functions) are located in the top display half.
Enter digits(s).
J
F
/
I
Navigate functions.
C
Use function.
J
C
Enter digits(s).
Use function. The result is calculated and displayed immediately.
right page (107) of ME75 Condor FUG en, A31008-H6980-A1-1-7619 (09.11.2005, 16:25) e x
2 x
MS
MR
M+
Basic mode
+, -, *, / Basic calculation types.
=
1/x
Result.
Conversion
.
% Convert to percentage.
Decimal point.
± Sign change "+" / "–"
§Options§ Extended mode:
Square root
Square
Exponent.
save displayed number.
Call up saved number.
Insert number from memory.
Calculator options
§Options§ Open menu.
Convert Call up the unit converter with the current result.
Clear all Delete all units.
Extended mode/
Basic mode
Convert calculation functions.
Memory save,
Memory recall,
Memory clear
Save or recall result; delete memory.
(For standard functions see page 15)
Extras 107
Unit converter
C
¢
S
¢
Unit converter
You can convert various measurement units into other measurement units.
The following types are offered with various units:
Velocity
Energy
Mass
Pressure
Time
Volume
Area
Length
Power
Temperature
Currency
Example of type Velocity units:
Type Units
Velocity Kilometres/h , Metres/sec ,
Miles/h , Miles/sec , Knots ,
Mach
left page (108) of ME75 Condor FUG en, A31008-H6980-A1-1-7619 (09.11.2005, 16:25)
108 Extras
Convert
F
Select the source unit/ currency.
Switch to the input field.
H
J
H
Enter the quantity to be converted.
Switch to the selection field.
F
Select the target measurement unit / currency
The result is displayed.
You can use both input fields alternately.
Special key functions:
*
Set decimal point.
Change prefix.
#
Currency
When you call up the function, you must enter a basic currency into which the conversions are to be made.
J
§Save§
Enter currency
(e. g. euro)
Store entry.
Now enter the name and exchange rate of the currency to be converted.
§Options§ Open menu.
Add currency Enter new currency and exchange rate.
Set as base Use entered currency as basic currency.
Edit rate Change the exchange rate of the basic currency.
Calc.
Start calculator.
(For standard functions see page 15)
right page (109) of ME75 Condor FUG en, A31008-H6980-A1-1-7619 (09.11.2005, 16:25)
C
¢
S
¢ Select function .
Stopwatch
Two intermediate times can be recorded and saved.
Display, also in standby mode.
C
Start/stop.
*
Save intermediate time.
After a stop:
§Reset§ Reset to zero.
Stopwatch options
§Options§ Open menu.
Stopwatch list
Display saved entries.
(For standard functions see page 15)
Extras 109
Countdown
A set time elapses. The last
3 seconds are indicated by a beep.
At the end a special beep sounds.
Display, also in standby mode.
If no time has been enetered:
C
Open input window
Set period of time.
J
C
Confirm.
C
Start.
If a countdown time is specified:
C
Start countdown.
While the time is elapsing:
C
Interrupt counter.
C
§Reset§
§Edit§
Let counter continue running.
Reset counter to starting time.
Enter new period of time and confirm with §OK§ .
left page (110) of ME75 Condor FUG en, A31008-H6980-A1-1-7619 (09.11.2005, 16:25)
110 Extras
Remote synchronisation
C
¢
S
¢
Remote syncr.
You can use this function remotely to access externally filed data (addresses, calendar, etc.) and synchronise these with the data on your phone. The data can, for example, be saved on a company computer or in the Internet. www.siemens-mobile.com/syncml
Syncronise
§Sync§
§Next§
The computer is selected and synchronisation started. When completed, the actions which have been performed are displayed.
Scroll through the various displays.
Sync. setting
The following settings can be made prior to synchronisation:
Active profile
You can choose between 5 profiles.
I
Select profile.
Activate profile.
C or
§Edit§ Set profile
Server sett.
Providers Display the current service provider.
Homepage: e.g. www.siemens.com
Port: Enter port number, e.g. 80.
User name: Enter user name
(Login name).
Password: Enter password (shown as a series of asterisks).
Calendar path:
Contacts path:
Notes path:
Tasks path:
HTTP authentication:
Confirmation required;
Yes / No (if No , the input fields are not visible).
HTTP name:
HTTP password:
Enter name.
Enter password.
right page (111) of ME75 Condor FUG en, A31008-H6980-A1-1-7619 (09.11.2005, 16:25)
Last sync:
Time of the last synchronisation.
Sync. mode
• Sync data: Modified data or All data
• Sync direction: Two-way ,
Mobile update or Server update
Date range
Select On/off
Enter the time in weeks in which entries (past and future) are to be synchronised.
Sync items:
Highlight database areas to be synchronised:
Calendar
Contacts
Notes
Tasks
Save settings.
C
Extras 111
Device manag.
C
¢
S
¢
Device manag.
If you were informed about software updates by a push message, you can establish a connection to the provider's server using the Device manager, so you can download them.
When downloading is finished, you will be asked to switch the phone off and on again. Afterwards, the software of your phone will be updated.
Please follow the instructions in the display.
The phone default setting varies from service provider to service provider:
• The settings have already been implemented by the provider. You can start immediately.
• Access profiles have already been created by your provider. Then select and activate profile.
• The access profiles must be configured manually. If necessary, check with your service provider for details. You will find the current settings for the service provider on the Internet at www.siemens.com/ mobilephonescustomercare under "FAQ".
left page (112) of ME75 Condor FUG en, A31008-H6980-A1-1-7619 (09.11.2005, 16:25)
112 Extras
Active profile
A standard profile for downloading the current software of the operating system is displayed.
§Sync§ Establish a connection with the active profile.
Or
§Edit§ Call up profile list.
Select profile.
I
C
Activate profile.
Or
§Edit§ Set profile.
Last connect.
Display last connection.
advertisement