<b>Making Connections</b>. Jensen JE1507, JE1507DC

Making Connections

Basic Connections

Overview

Connecting Antenna

System

To display clear, crisp pictures, you must connect your TV correctly and choose the correct display format. It is strongly recommended to connect the cable and antenna input using a 75-ohm coaxial cable to receive an optimum picture quality signal. A 300-ohm twin lead cable can be easily affected by radio noise and the like, resulting in signal deterioration. If you use a 300-ohm twin lead cable, keep it as far away as possible from the TV.

The way in which you connect your TV will vary, depending on how your home receives a signal (antenna and satellite; cable and cable box).

Do not use an indoor antenna, which is especially susceptible to radio noise.

Disconnect all power sources before making any connections.

For best results, use this connection if you have an antenna system.

TV Left Side

Antenna cable

Be sure to choose "Air” before you start Auto Program. See chapter "Getting

Started" for details.

Connecting Cable

System

For best results, use this connection if you have a cable system.

TV Left Side

CATV cable

Be sure to choose "Cable" before you start Auto Program. See chapter

"Getting Started" for details.

9