Rear Jack Panel Connections. Philips 27HT7210D, 27HT4000D, 27HT4000D, 27HT7210D
Add to My manuals25 Pages
advertisement
REAR JACK PANEL CONNECTIONS
* WARNING :
Risk of electric shock. Rear jack panel must be removed by qualified personnel only.
- Plug (RJ-12) connector.
Monitor
Out
Ext Spkr
L
Y
Pb
Video In
Component
Video Input
L
Audio
S-VIDEO
RJ12
Smart Plug R Pr R
Applicable to 27HT7210D/27 only
Monitor
Out AV1 in
Y
AV2 in
L
R
Pb
Pr
L
R
S-VIDEO
Applicable to 27HT4000D/27 only
SmartCard slot
& cover
Note :
1. Do not connect Video In and S-Video simultaneously.
2. When a Smart Card with Audio/Video and S-
Video inputs are installed into the Smart Card slot, the inputs on the Smart Card cannot be connected concurrently with the Video In or S-
Video and Audio L/R In of the TV set or vice
3.
versa. In this case, you can only use either the inputs on the Smart Card or TV set.
When connecting Y Pb Pr inputs to the
27HT4000D/27, please note that the correct Audio-
In connectors should be the Red & White jacks under the label AV2 In, and not under AV1 In.
7
REMOTE CONTROLS
The following remote controls are applicable to Philips Business Display Solutions TV products. These can be used for setup and configuration purposes.
Slide this button up to enter into
Guest mode.
Slide this side button down to enter into Setup mode.
POWER
RECALL
CC
GUEST
DCM
1
SETUP
4
7
RESET
TEXT
2
5
8
0
SMART SLEEP
9
GUIDE
CH
3
6
M A/CH
_
VOL
+
_
+
_
+
CH
A
E
B
F
C
G
D
CLOCK A / V
RC2888/01
Guest-Mode Remote
RC2573GR
(optional)
RC2573GR is an optional remote control for Institutional TV / Business Display Solutions features and
SmartCard settings. It can be purchased separately. Refer to this document for details of its functions.
1
When in setup mode, press RECALL on the
RC2573GR remote control.
2
You'll see and an information screen that describes the TV chassis firmware version, diagnostic codes, setup information, and other service and technical data regarding the TV's configuration.
3
Line#11 indicates whether the TV is in CONSUMER or COMMERCIAL mode, and whether it is on-line with a SmartPort DCM (such as a CLON99BK
SmartLoader, Net1Card, or Net01SC SmartCard).
For more information refer to the service documentation for the ITV/BDS LO6 TV Chassis.
1
2
3
4
5
6
7
LO6HU1 1.1
HRM SW H3.03C
CODE
OP 34
AUTO AUTO
0
4
0
161
STEREO
0
9
0
60
8
9
CO 35 CL 31 BR 33 SH 31
VL 6 BL 0
10 BS 31 TR 31
11 COMMERCIAL SMARTPORT OFF
12 CHANNEL CVI
0
117 0
8
Source Select
To toggle between available video sources
Close Caption
To activate Close Caption function
DVD Pause
To Pause DVD playback
DVD Stop
To stop DVD playback (if applicable)
Smart Sound
To select predefined sound settings
Sleep
Activate the sleep timer. Press repeatedly to increase countdown time
GUEST REMOTE CONTROL KEYS
CH Guide
To activate Channel Guide function
Standby
Press to switch the TV off or on
DVD Play
Press to switch the TV off or on
DVD Rewind
To rewind DVD playback
DVD Fast Forward
To Fast Forward DVD playback (if applicable)
Smart Picture
To select predefined picture settings
OK
To confirm a selection
Menu
To call up or exit the menu
VOL(ume) + / -
To adjust TV volume
CH(annel) + or CH(annel) -
To select channels
Mute
Turn the sound on or off
0 - 9 Digit Keys
To select a TV channel. For a two digit program number, enter the second digit before the dash appears
Alternate Channel
To toggle between alternating channels
16:9 Formats
To adjust TV screen formats
LOW BATTERY CHECK
SERVICE
1 REMOTE BATTERY OK
If the word "LOW" appears instead of "OK", the batteries are low and must be replaced.
9
advertisement