Getting help. Kodak R502, Slice, KLIC-7000, SLICE Touchscreen R502, SLICE R502

urg_01090.book Page 22 Tuesday, March 2, 2010 11:11 AM

3

Getting help

For product support, go to www.kodak.com/go/slicesupport and choose

Step-by-Step Solutions & Repair.

If the camera does not turn on/off:

■

■

If battery power is extremely low, the camera may turn off. In most cases, this is normal and can be corrected by recharging the battery.

In the U.S. and other countries where the Step-by-Step Solutions

& Repair tool is available:

Recharge the battery or install a new one.

If the problem persists, go to

See page 1

.

select Step-by-Step Solutions & Repair to resolve or to set up a repair request.

www.kodak.com/go/slicesupport and

In countries where the Step-by-Step Solutions & Repair tool is not available:

■

■

■ Recharge the battery or install a new one.

If the problem persists:

See page 1

.

■ Verify that you are using the correct battery. Go to www.kodak.com/go/batterychart .

Recharge the battery or install a new one.

See page 1

.

If the problem persists, go to www.kodak.com/go/wwcontacts to locate your nearest repair center.

Download software

Register your camera

Email, write, or chat with

Kodak (where available) www.kodak.com/go/slicedownloads www.kodak.com/go/register www.kodak.com/go/contact

22 www.kodak.com/go/easysharecenter