advertisement
Turning the INF5520 On/Off
1) Verify that the power cord is connected to a power outlet and that the power switch on the Bottom Connector Panel is ON.
2) Press the Power button located on either: a. the remote b. the right side of the tablet c. or the back of the tablet on the PC box.
The front LED turns green.
3) Press the Power button again to put Mondopad into Standby. The front LED turns red. You can also put your tablet to sleep using the keyboard. The front LED turns orange.
NOTES:
If the tablet becomes locked and does not respond to normal power down procedures, the tablet can be powered down by pressing and holding the PC box Power button (located on the back of the tablet) for 7-8 seconds.
By default, Mondopad will time out at 10 minutes and go into system standby after 20 minutes of inactivity. Power settings for the
Mondopad can be changed in Windows Control Panel> Hardware and Sound > Power Options.
Page 16
advertisement
Related manuals
advertisement
Table of contents
- 5 Declaration of Conformity
- 8 Safety Considerations
- 10 Information about this Hardware Guide
- 11 What’s Included
- 12 Setup
- 12 Attaching the Sound Bar
- 14 Installing the Feet
- 15 Attaching the HD Video Conferencing Camera
- 16 Connecting to Other Devices
- 17 Connecting AC Power
- 18 Turning the INF5520 On/Off
- 19 Setting up the Wireless Mouse and Keyboard
- 19 Wireless Mouse
- 19 Wireless Keyboard
- 20 Using the Remote
- 22 Using the Keypad
- 23 OSD (On-Screen Display) Menu System
- 24 Picture Menu
- 25 Screen Menu
- 26 Audio menu
- 27 PIP menu
- 29 Configuration 1
- 30 Configuration 2
- 31 Advanced Option
- 32 Troubleshooting
- 35 Specifications
- 38 Limited Warranty