BASIC OPERATION - DESIGN SERIES MODELS. Bertazzoni F30 CON XT

START

BASIC OPERATION - DESIGN SERIES MODELS

Activate the oven by touching any control area for 2 seconds.

Start programming with

Select COOKING MODES and confirm

Set desired COOKING TEMPERATURE and confirm

Note

The oven will start PRE-HEATING in a few second showing the progress in the display. The end of pre-heating will be confirmed with a tone. Place the food in the oven when the desired temperature has been reached.

The preheating bar is not shown.in broil, convection broil, dehydrate, defrost, warming and proofing modes.

MODIFY/STOP Modify COOKING MODE during cooking with

Modify COOKING TEMPERATURE during cooking with

STOP cooking with and confirm

21