- Computers & electronics
- Print & Scan
- Scanner Transparancy Adapters
- Canon
- CanoScan FB 1200S
- Getting started guide
Macintosh Platform: Installing the Scanner Software. Canon 1200S, CanoScan FB 1200S
Add to my manuals63 Pages
advertisement
Windows
Macintosh
C Click the [Browse] button and specify the CD-ROM drive in the input box.
Although this example uses
[D:] as the CD-ROM drive letter, your computer may use another letter, such as
[E:] or [F:]. Substitute the appropriate drive letter for
Input the drive letter corresponding to your CD-
ROM drive.
your system.
▼The required files will be loaded onto your computer and Windows will start.
D Remove the CanoScan Setup Utility CD-ROM from the drive.
Device Driver Wizard Dialog Displays (Windows 95 Newer Version)
A Place the CanoScan Setup
Utility CD-ROM in the drive and click the [Next] button.
B Click the [Finish] button when the New driver found for this device dialog displays.
WARNING
• If the Driver Not Found dialog displays, click the [Back] button
and redo Step A. The driver was probably not found because the Next button was clicked before the computer was able to finish reading the CD-ROM.
▼The required files will be loaded from the CD-ROM and Windows will start.
C Remove the CanoScan Setup Utility CD-ROM from the drive.
FB1200S Getting Started 23
Add New Hardware Wizard Displays (Windows 98)
A Click the [Next] button.
Windows
Macintosh
B Select [Search for the best driver for your device] and click the [Next] button.
C Place the CanoScan Setup Utility CD-ROM in the drive.
D Select the CD-ROM drive and click the [Next] button.
E Click the [Next] button if
Canon CanoScan FB1200S
Scanner displays in the following dialog.
Canon CanoScan FB1200S
Scanner Displays
WARNING
• If the Driver Not Found dialog displays, click the [Back] button
and redo Step D. The driver was probably not found because the Next button was clicked before the computer was able to finish reading the CD-ROM.
24 FB1200S Getting Started
Windows
Macintosh
F Click the [Finish] button.
▼Windows will start.
G Remove the CanoScan Setup Utility CD-ROM from the drive.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
4 Place the CanoScan Setup Utility CD-ROM in the computer drive.
• Language select window will display to select your language, then the following window will automatically display.
○
Menu Window
• If the menu window fails to display, double-click the [My Computer] icon on the Windows desktop, then the [Canoscan] icon.
FB1200S Getting Started 25
Windows
Macintosh
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
5 Click the [Install/Uninstall Software] button.
▼The following window will display.
• If you accidentally click the wrong item, click the [Return to the previous menu] button and reclick the correct item.
○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
6 Click the [Start Installation] button at the window’s bottom right.
○ ○ ○ ○ ○ ○ ○
WARNING
• Do not restart the computer or remove the CD-ROM from the drive while the installation is proceeding unless so directed by a CanoScan Setup Utility message. These actions would disrupt the installation.
• Do not perform any other operations during the installation.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
7 Proceed with the installation by following the on-screen instructions.
• After all the software programs have been installed, restart the computer as prompted by the on-screen instruction.
○ ○ ○
WARNING
• Do not click anything other than the specified buttons or items.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
8 Remove the CanoScan Setup Utility CD-ROM from the drive.
• Handle the CD-ROM with care, placing it into a protective case.
○
26 FB1200S Getting Started
Windows
Macintosh
WARNING
• Please see the Users Registration Card for the serial number required to install Adobe Photoshop 5.0 LE.
• If the installation is unsuccessful even when all the prescribed procedures are followed, read the following procedures.
Installation does not seem to be working (Windows)
Solution:
Manually install the software by clicking the [Start] button, selecting [Run] and typing one of the command lines below into the box. If your CD-ROM drive is labeled other than [D:], substitute the appropriate letter, such as [E:] or [F:], in the lines below.
To install ScanGear CS-S:
To install ScanGear Toolbox CS:
[D:\Scangear\English\Disk1\Setup.exe]
[D:\Toolbox\English\Disk1\Setup.exe]
To install Adobe Photoshop 5.0 LE: [D:\Photosle\English\Setup.exe]
To install Caere OmniPage Limited Edition: [D:\Ople\Disk1\Setup.exe]
To install Adobe Acrobat Reader 3.0: [D:\Acroread\English\Ar32e301.exe]
•
NOTE
•
• The above instructions are for installing all of the supplied software programs. However, you can control which programs are installed by clicking the check box beside the name of a program and deleting the check mark before clicking the
[Start Installation] button. You may also use the [Install/
Uninstall Software] button to delete the supplied programs from your computer.
• The CD-ROM can also be used to read the electronic manuals accompanying the software and display the list of files on the
CD-ROM. For more detail, refer to Chapter 2 in the Product
Guide, How to use the CanoScan Setup Utility CD-ROM.
You are now ready to try out the scanner.
FB1200S Getting Started 27
Trying Out the Scanner
Windows
Macintosh
Windows
The following instructions show you how to test the scanner and experiment with two software programs. You will use Adobe Photoshop 5.0 LE and ScanGear CS-S.
WARNING
• ScanGear CS-S is a TWAIN driver and cannot be started by itself. It has to be operated from an application software such as Adobe Photoshop 5.0 LE. For details, please read
What is a TWAIN Driver? (p. 48).
• If the equipment fails to operate correctly even after following the procedures below, please read the Troubleshooting section of the Product Guide electronic manual.
Starting the Application Software.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
1 From [Start] and [Programs], choose [Adobe],
[Photoshop 5.0 Limited Edition] and [Adobe
Photoshop 5.0 Limited Edition].
○ ○ ○ ○ ○
Adobe Photoshop 5.0 LE will start.
28 FB1200S Getting Started
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- - Inspecting the Package Contents
- - Setting Up the Scanner
- - Installing the SCSI Card
- 7 Connecting to the Computer
- 11 Installing the Software
- 13 Windows Platform: Installing the Scanner Software
- 19 Trying Out the Scanner
- 25 Macintosh Platform: Installing the Scanner Software
- 31 Trying Out the Scanner
- 37 How to Use the Software
- 38 Using ScanGear CS-S
- 40 Scanning with ScanGear Toolbox CS
- 41 Scanning with Adobe Photoshop 5.0 LE
- 42 Scanning with Caere OmniPage Limited Edition
- 44 Using Plug-in Module CS-S
- 46 Scanning with CanoScan Toolbox CS
- 47 Scanning with Adobe Photoshop 5.0 LE
- 48 Viewing Electronic Manuals with Adobe Acrobat Reader
- 50 System Information
- 48 How to Use the Software
- 49 Using ScanGear CS-S
- 51 Scanning with ScanGear Toolbox CS
- 52 Scanning with Adobe Photoshop 5.0 LE
- 53 Scanning with Caere OmniPage Limited Edition
- 55 Using Plug-in Module CS-S
- 57 Scanning with CanoScan Toolbox CS
- 58 Scanning with Adobe Photoshop 5.0 LE
- 59 Viewing Electronic Manuals with Adobe Acrobat Reader
- 61 System Information