- Computers & electronics
- Computers
- Servers
- Dell
- OpenManage Server Administrator Version 7.4
- User manual
Using The omhelp Command. Dell OpenManage Server Administrator Version 7.4
Add to My manuals198 Pages
advertisement
2
Using The omhelp Command
The omhelp command and its equivalent, <command> -?, accesses the detailed help-text interface of
Command Line Interface (CLI). You can get help at several levels of detail.
Each fully-qualified CLI command may have a variable number of distinct parts: the command
(command level 1), one or more subcommands (command level 2 and command level 3, if present), and one or more name= value pair(s).
By appending -?(space-dash-question mark) to any command, you can get help for that command.
Example Help Commands
When you type omconfig -?, you get general help about the omconfig command. The help at this level lists the available subcommands for omconfig:
• about
• preferences
• chassis
• system
When you type omconfig system -?, the CLI help lists all the subcommands available for omconfig system:
• alertaction
• alertlog
• assetinfo
• cmdlog
• esmlog
• events
• platformevents
• pedestinations
• recovery
• shutdown
• thrmshutdown
• webserver
Also parse the omconfig system assetinfo command as follows:
<command level 1 command level 2 command level 3> <name=value pair 1>
[name=value pair 2] where command levels 1, 2, and 3 are represented by omconfig system assetinfo, name=value pair 1 is represented by info=depreciation , and name=value pair 2 is represented by method=straightline.
To set the depreciation method to straight line, type: omconfig system assetinfo info=depreciation method=straightline
17
The CLI responds with the following message:
Asset information set successfully.
When you type omconfig system assetinfo -?, the help that displays provides information about assigning values for the name and option fields. Partial results for the request omconfig system assetinfo
-? are as follows: assetinfo Set asset information.
For one info value, specify one or more optional parameter(s).
The following table displays the optional parameters for info=acquisition:
Table 2. Optional Parameters
Info Value
Info=acquisition
Optional parameters purchasecost=<num> waybill <num>installdate
=<mmddyy> purchasedate=<mmddyy> ponum=<num> signauth=<text> expensed=<yes|
no> costcenter=<text> info=depreciation method=<text> duration= <num> percent=<percent> unit=<months | years |
unknown>
18
advertisement
Related manuals
advertisement
Table of contents
- 3 Dell OpenManage Server Administrator Version 7.4 Command Line Interface Guide
- 11 Introduction
- 11 What's New In This Release
- 13 Accessing The Windows Command Prompt To Run CLI Commands
- 13 Primary CLI Commands
- 14 CLI Error Checking And Error Messages
- 14 Success Messages
- 14 Failure Messages
- 15 Scripting And Comparing Using CLI
- 15 Command Syntax Overview
- 17 Using The omhelp Command
- 17 Example Help Commands
- 19 omreport: Viewing System Status Using The Instrumentation Service
- 19 Conventions For Parameter Tables
- 20 Command Summary Of The omreport Command
- 23 Help With The omreport Command
- 23 omreport modularenclosure
- 24 omreport about
- 25 Omreport Chassis Or Omreport Mainsystem Commands
- 25 Omreport Chassis Acswitch Or Omreport Mainsystem Acswitch
- 26 Omreport Chassis Batteries Or Omreport Mainsystem Batteries
- 26 Omreport Chassis Bios Or Omreport Mainsystem Bios
- 26 Omreport Chassis Biossetup Or Omreport Mainsystem Biossetup
- 27 BIOS Setup Parameters On Systems Prior To PowerEdge 12G Systems
- 29 BIOS Setup Groups On PowerEdge yx2x Systems
- 30 Omreport Chassis Currents Or Omreport Mainsystem Currents
- 30 Omreport Chassis Fans Or Omreport Mainsystem Fans
- 30 Omreport Chassis Firmware Or Omreport Mainsystem Firmware
- 31 Omreport Chassis Frontpanel Or Omreport Mainsystem Frontpanel
- 31 Omreport Chassis Fru Or Omreport Mainsystem Fru
- 31 Omreport Chassis Hwperformance Or Omreport Mainsystem Hwperformance
- 32 Omreport Chassis Info Or Omreport Mainsystem Info
- 32 Omreport Chassis Intrusion
- 33 Omreport Chassis Leds Or Omreport Mainsystem Leds
- 33 Omreport Chassis Memory Or Omreport Mainsystem Memory
- 35 Omreport Chassis Nics Or Omreport Mainsystem Nics
- 36 Omreport Chassis Ports Or omreport Mainsystem Ports
- 36 Omreport Chassis Processors Or Omreport Mainsystem Processors
- 39 Omreport Chassis Pwrmanagement Or Omreport Mainsystem Pwrmanagement
- 40 Omreport Chassis Pwrmonitoring Or Omreport Mainsystem Pwrmonitoring
- 42 Omreport Chassis Pwrsupplies Or Omreport Mainsystem Pwrsupplies
- 42 Omreport Chassis Remoteaccess Or Omreport Mainsystem Remoteaccess
- 43 Omreport Chassis Removableflashmedia Or Omreport Mainsystem Removableflashmedia
- 44 Omreport Chassis Slots Or Omreport Mainsystem Slots
- 44 Omreport Chassis Temps Or Omreport Mainsystem Temps
- 44 Omreport Chassis Volts Or Omreport Mainsystem Volts
- 45 Omreport Licenses
- 45 Omreport System Commands Or Omreport Servermodule Commands
- 45 Omreport System Or Omreport Servermodule
- 46 Commands For Viewing Logs
- 46 Omreport System Alertaction Or Omreport Servermodule Alertaction
- 48 Omreport System Assetinfo Or Omreport Servermodule Assetinfo
- 48 Omreport System Events Or Omreport Servermodule Events
- 49 Omreport System Events Type Or Omreport Servermodule Events Type
- 50 Omreport System Operatingsystem Or Omreport Servermodule Operatingsystem
- 50 Omreport System Pedestinations Or Omreport Servermodule Pedestinations
- 51 Omreport System Platformevents Or Omreport Servermodule Platformevents
- 52 Omreport System Recovery Or Omreport Servermodule Recovery
- 52 Omreport System Shutdown Or Omreport Servermodule Shutdown
- 52 Omreport System Summary Or Omreport Servermodule Summary
- 57 Omreport System Thrmshutdown Or Omreport Servermodule Thrmshutdown
- 57 Omreport System Version Or Omreport Servermodule Version
- 58 Omreport Preferences Commands
- 58 Omreport Preferences Messages
- 58 Omreport Preferences Webserver
- 61 Omconfig: Managing Components Using The Instrumentation Service
- 61 Conventions For Parameter Tables
- 62 omconfig Command Summary
- 64 Help With The Omconfig Command
- 65 Omconfig About
- 66 Omconfig Chassis Or Omconfig Mainsystem
- 66 Omconfig Chassis Biossetup Or Omconfig Mainsystem Biossetup
- 83 Omconfig Chassis Currents Or Omconfig Mainsystem Currents
- 83 Omconfig Chassis Fans Or Omconfig Mainsystem Fans
- 84 Omconfig Chassis Frontpanel Or Omconfig Mainsystem Frontpanel
- 85 Omconfig Chassis Info Or Omconfig Mainsystem Info
- 86 Omconfig Chassis Leds Or Omconfig Mainsystem Leds
- 86 Omconfig Chassis Memorymode Or Omconfig Mainsystem Memorymode
- 88 Omconfig Chassis Pwrmanagement Or Omconfig Mainsystem Pwrmanagement
- 89 Omconfig Chassis Pwrmonitoring Or Omconfig Mainsystem Pwrmonitoring
- 91 Omconfig Chassis Remoteaccess Or Omconfig Mainsystem Remoteaccess
- 99 Omconfig Chassis Temps Or Omconfig Mainsystem Temps
- 100 Omconfig Chassis Volts Or Omconfig Mainsystem Volts
- 101 Omconfig Preferences
- 101 Omconfig Preferences Cdvformat
- 101 Omconfig Preferences Dirservice
- 102 Omconfig Preferences Messages
- 102 Omconfig Preferences Useraccess
- 102 Omconfig Preferences Webserver
- 103 Omconfig System Or Omconfig Servermodule
- 103 Omconfig System Alertaction Or Omconfig Servermodule Alertaction
- 107 Commands For Clearing Logs
- 107 Omconfig System Pedestinations Or Omconfig Servermodule Pedestinations
- 108 Omconfig System Platformevents Or Omconfig Servermodule Platformevents
- 110 Omconfig System Events Or Omconfig Servermodule Events
- 112 Omconfig System Webserver Or Omconfig Servermodule Webserver
- 113 Omconfig System Recovery Or Omconfig Servermodule Recovery
- 113 Omconfig System Shutdown Or Omconfig Servermodule Shutdown
- 114 Omconfig System Thrmshutdown Or Omconfig Servermodule Thrmshutdown
- 117 Omconfig System Or Servermodule Assetinfo: Editing Cost Of Ownership Values
- 117 Adding Acquisition Information
- 118 Example Command For Adding Acquisition Information
- 119 Adding Depreciation Information
- 120 Example Command For Adding Depreciation Information
- 120 Adding Extended Warranty Information
- 121 Example Command For Adding Extended Warranty Information
- 121 Adding Lease Information
- 122 Example Command For Adding Lease Information
- 122 Adding Maintenance Information
- 122 Example Command For Adding Maintenance Information
- 123 Adding Outsource Information
- 123 Example Command For Adding Outsource Information
- 124 Adding Owner Information
- 124 Example Command For Adding Owner Information
- 124 Adding Service Contract Information
- 125 Example Command For Adding Service Information
- 125 Adding Support Information
- 126 Example Command For Adding Support Information
- 126 Adding System Information
- 127 Example Command For Adding System Information
- 127 Adding Warranty Information
- 128 Example Command For Adding Warranty Information
- 129 Using The Storage Management Service
- 129 CLI Command Syntax
- 130 Syntax Of Command Elements
- 131 User Privileges For Omreport Storage And Omconfig Storage
- 133 Omreport Storage Commands
- 134 Omreport Physical Disk Status
- 134 omreport Virtual Disk Status
- 135 Omreport Controller Status
- 135 Omreport Enclosure Status
- 136 Omreport Temperature Probe Status
- 136 Omreport Fan Status
- 137 Omreport Power Supply Status
- 138 Omreport EMM Status
- 138 Omreport Enclosure Slot Occupancy Report
- 139 Omreport Battery Status
- 139 Omreport Global Information
- 140 Omreport Connector Status
- 140 Omreport Cachecade Status
- 140 Omreport PCIe SSD Status
- 141 Omreport Fluid Cache Status
- 141 Omreport Fluid Cache Pool Status
- 141 omreport Partition Status
- 141 Omreport Fluid Cache Disk Status
- 142 Omreport Storage Tape
- 143 Omconfig Storage Commands
- 144 Omconfig Physical Disk Commands
- 144 Omconfig Blink Physical Disk
- 145 Omconfig Unblink Physical Disk
- 145 Omconfig Prepare To Remove Physical Disk
- 146 Omconfig Instant Erase Secured Physical Disk
- 146 Omconfig Cryptographic Erase Secured Physical Disk
- 147 Omconfig Initialize Physical Disk
- 147 Omconfig Offline Physical Disk
- 148 Omconfig Online Physical Disk
- 148 Omconfig Assign Global Hot Spare
- 148 Omconfig Rebuild Physical Disk
- 149 Omconfig Cancel Rebuild Physical Disk
- 150 Omconfig Cancel Replace Member
- 150 Omconfig Clear Physical Disk
- 150 Omconfig Cancel Clear Physical Disk
- 151 Omconfig Enable Device Write Cache
- 151 Omconfig Disable Device Write Cache
- 152 Omconfig Export Reliability Log
- 152 Omconfig Convert RAID To Non-RAID
- 153 Omconfig Convert Non-RAID To RAID
- 153 Omconfig Virtual Disk Commands
- 154 Omconfig Check Consistency
- 155 Omconfig Cancel Check Consistency
- 155 Omconfig Pause Check Consistency
- 155 Omconfig Resume Check Consistency
- 156 Omconfig Blink Virtual Disk
- 156 Omconfig Unblink Virtual Disk
- 156 Omconfig Initialize Virtual Disk
- 156 Omconfig Fast Initialize Virtual Disk
- 157 Omconfig Slow Initialize Virtualize Disk
- 157 Omconfig Cancel Initialize Virtual Disk
- 158 Omconfig Cancel Background Initialize
- 158 Omconfig Assign Dedicated Hot Spare
- 158 Omconfig Delete Virtual Disk
- 159 Omconfig Format Virtual Disk
- 159 Omconfig Reconfiguring Virtual Disks
- 160 Omconfig Secure Virtual Disk
- 160 Omconfig Clear Virtual Disk Bad Blocks
- 161 Omconfig Change Virtual Disk Policy
- 161 Omconfig Replace Member Virtual Disk
- 161 Omconfig Rename Virtual Disk
- 162 Omconfig Enable Fluid Cache on Virtual Disk
- 162 Omconfig Disable Fluid Cache on Virtual Disk
- 162 Omconfig Reactivate Fluid Cache on Virtual Disk
- 163 Omconfig Controller Commands
- 165 Omconfig Rescan Controller
- 165 Omconfig Enable Controller Alarm
- 165 Omconfig Disable Controller Alarm
- 165 Omconfig Quiet Controller Alarm
- 166 omconfig Test Controller Alarm
- 166 Omconfig Reset Controller Configuration
- 166 omconfig Create Virtual Disk
- 173 Omconfig Set Controller Rebuild Rate
- 173 omconfig Change Controller Properties
- 174 Omconfig Discard Preserved Cache
- 174 Omconfig Create Encryption Key
- 175 Omconfig Change Encryption Key
- 175 Omconfig Delete Encryption Key
- 175 Omconfig Set Background Initialization Rate
- 175 Omconfig Set Reconstruct Rate
- 176 Omconfig Set Check Consistency Rate
- 176 Omconfig Export The Controller Log
- 176 Omconfig Import Secure Foreign Configuration
- 177 Omconfig Import Foreign Configuration
- 177 Omconfig Import Or Recover Foreign Configuration
- 177 Omconfig Clear Foreign Configuration
- 177 Omconfig Physical Disk Power Management
- 178 Omconfig Set Patrol Read Mode
- 178 Omconfig Start Patrol Read
- 178 Omconfig Stop Patrol Read
- 179 Omconfig Create Cachecade
- 179 Omconfig Enable LKM Controller
- 179 Omconfig Rekey LKM Controller
- 179 Omconfig Convert Multiple RAID To Non-RAID
- 180 Omconfig Convert Multiple Non-RAID To RAID
- 180 Omconfig Enclosure Commands
- 180 Omconfig Enable Enclosure Alarm
- 181 Omconfig Disable Enclosure Alarm
- 181 Omconfig Set Enclosure Asset Tag
- 181 Omconfig Set Enclosure Asset Name
- 182 Omconfig Set Temperature Probe Thresholds
- 182 Omconfig Reset Temperature Probe Thresholds
- 183 Omconfig Set All Temperature Probe Thresholds
- 183 Omconfig Reset All Temperature Probe Thresholds
- 183 Omconfig Blink
- 184 Omconfig Battery Commands
- 184 omconfig Start Battery Learn Cycle
- 184 Omconfig Delay Battery Learn Cycle
- 184 Omconfig Global Commands
- 185 Omconfig Global Enable Smart Thermal Shutdown
- 185 Omconfig Global Disable Smart Thermal Shutdown
- 186 Omconfig Global Rescan Controller
- 186 Omconfig Set Hot Spare Protection Policy
- 186 Omconfig Connector Commands
- 186 Omconfig Rescan Connector
- 187 Omconfig Cachecade Commands
- 187 Omconfig Blink Cachecade
- 187 Omconfig Unblink Cachecade
- 188 Omconfig Delete Cachecade
- 188 Omconfig Resize Cachecade
- 188 Omconfig Rename Cachecade
- 189 Omconfig PCIe SSD Commands
- 189 omconfig Add PCIe SSD Device To Cachepool
- 189 Omconfig Add PCIe SSD Device To Cachepool
- 189 Omconfig Reactivate PCIe SSD Device
- 190 Omconfig Fluid Cache Commands
- 190 Omconfig Applying Or Updating License To The Fluid Cache
- 190 Omconfig Conecting To The Fluid Cache
- 190 Omconfig Partition Command
- 190 Omconfig Refreshing Partition List
- 191 Omconfig Fluid Cache Disk Command
- 191 Omconfig Discarding Data And Disabling Caching
- 193 Working With CLI Command Results
- 193 Output Options For Command Results
- 193 Controlling Command Output Display
- 194 Writing Command Output To A File
- 194 Saving Command Results To A File That Is Overwritten
- 195 Append Command Results To An Existing File
- 196 Selecting A Format For The CLI Command Output
- 196 List (lst)
- 197 Table (tbl)
- 197 Semicolon-Separated Values (ssv)
- 198 Custom Delimited Format (cdv)