Window Vent Panel and Extensions. LG LP 1200DXR

I N S TA L L AT I O N I N S T RU C T I O N S

WINDOW VENT PANEL AND EXTENSIONS

The window installation kit allows you to install the air conditioner in most vertical-sliding windows 18" to 36" wide, or casement-style windows from 18" to 36" high.

Small extension panel

18

"

Vent

Panel

Vent

Panel

18

"

For an 18

" window opening, use the window vent panel by itself.

18 1 ⁄

4

" − 24"

Vent

Panel

Small extension panel

18 1 ⁄

4

" − 24"

For window openings from 18 1 ⁄

4

" to 24", use the window vent panel and the small extension panel.

Vent

Panel

Large extension panel

24

" − 29"

Vent

Panel

Large extension panel

Vent

Panel

24

" − 29"

For window openings from 24

" to 29", use the window vent panel and the large extension panel.

Large extension panel

29

" − 36"

Large extension panel

Vent

Panel

Vent

Panel

Small extension panel

29

" − 36"

Small extension panel

For window openings from 29

" to 36", use the window vent panel and both extension panels.

15

I N S TA L L AT I O N I N S T RU C T I O N S

INSTALLATION IN VERTICAL SLIDING WINDOWS

NOTE: The window installation kit can be used with vertical sliding windows between 18" and 36" wide.

Foam seal C

(Adhesive type-shorter)

Extension panel

(if required)

Vent

Panel

Foam seal A

(Adhesive type)

1 Cut the foam seal A(adhesive type) &

C(adhesive type-shorter) to the proper

Tipo C de sellado con espuma length, and attach it to the window sash and frame.

Rain shield

2 Insert the vent panel assembly, including extension panels, if needed, into the window opening. Make sure the rain shield is to the outside and sloping down. Extend the extension panels, if used.

Sellante de espuma A

(Tipo adhesivo)

Foam seal B

(Non-adhesive type)

Type B screws

Joints en Mousse C

(Plus court de type adhésif)

3 Carefully lower the window. Secure the vent panel in place with 4 type B screws, plus one screw for each extension:

Vent panel only: 4 type B screws

Vent panel and one extension: 5 type B screws

Vent panel and two extensions: 6 type B screws

4 Cut the foam seal B(Non-adhesive type) to the window width. Stuff the foam seal B room.

Sellado con espuma B

(tipo no adhesivo)

16

Joints en Mousse B

(Non adhésif)