Editing and
Printin g
Image s
Editing Images
Changing the Image Size (Resize)
By changing the recorded pixels of a selected image, you can make the file size smaller than the original. You can use this function to continue taking pictures when the SD Memory Card or the built-in memory is full, by making the images smaller and overwriting the original images to make more space available.
• Images taken with the recorded pixels of n/h/m and movies cannot be resized.
• You cannot select a larger resolution than that of the original image.
1 In Q mode, use the four-way controller (45) to choose the image you want to resize.
2 Use the four-way controller (2345) to select n
(Resize) from the Playback Mode Palette.
3 Press the 4 button.
The screen for choosing the number of recorded pixels appears.
4 Use the four-way controller
(45) to select the number of recorded pixels.
5
MENU
Recorded Pixels h
OK
5 Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a new image and the following confirmation dialog does not appear.
6 Use the four-way controller (23) to select [Overwrite] or [Save as].
105
7 Press the 4 button.
The resized image is saved.
Cropping Images
You can delete the unwanted part of a picture and save the cropped image as a new image.
Images taken with the recorded pixels of n/h/m and movies cannot be cropped.
5
1 In Q mode, use the four-way controller (45) to choose the image you want to crop.
2 Use the four-way controller (2345) to select o
(Cropping) from the Playback Mode Palette.
3 Press the 4 button.
The cropping screen appears.
The largest size of cropped image is shown with a green frame on the screen. The cropped image cannot be larger than this cropping frame size.
4 Choose the cropping area.
Change the size and/or position of the cropping frame by the following operations.
Zoom button
Four-way controller
(2345)
Changes the size of the cropping frame.
Moves the cropping frame up, down, left and right.
Green button Rotates the cropping frame.
• The button is displayed only when the cropping frame can be rotated.
MENU OK
106
5 Press the 4 button.
The cropped image is saved with a new file name.
The number of recorded pixels is selected automatically according to the size of the cropped image.
Processing Images to Make a Face Look Smaller
Images are processed to reduce the size of a person’s face detected
with the Face Detection function (p.59) when taking pictures so that the
face looks smaller.
1 In Q mode, use the four-way controller (45) to choose the image you want to edit.
2 Use the four-way controller (2345) to select k
(Small Face Filter) from the Playback Mode Palette.
3 Press the 4 button.
After a face detection frame for a face that can be corrected is displayed, the correction screen appears.
4 Use the four-way controller
(45) to change the reduction ratio.
F Approx. 5 %
G Approx. 7 %
H Approx. 10 %
MENU OK
5 Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a new image and the following confirmation dialog does not appear.
6 Use the four-way controller (23) to select [Overwrite] or [Save as].
7 Press the 4 button.
The camera returns to Q mode and the processed image is displayed.
5
107
You may not be able to process images in the following situations:
- When the size of face taken in relation to an image is too large or too small
- When a face is not in the center of an image
Processing Images with the Miniature/HDR Filter
This function lets you perform special processing on the selected image.
o Miniature Filter p HDR Filter
Processes the subjects in the images to look like miniature objects.
The processed image will be saved with the recorded pixels of f for the 4:3 aspect ratio, and 1 for the 16:9 aspect ratio.
Images of size f or smaller with the 4:3 aspect ratio, and
1 or smaller with the 16:9 aspect ratio, cannot be processed.
Processes image into HDR-like image.
5
Movies and images taken with another camera cannot be processed using the Miniature/HDR Filter function.
1 In Q mode, use the four-way controller (45) to choose the image you want to edit.
2 Use the four-way controller (2345) to select o
(Miniature) or p (HDR) from the Playback Mode
Palette.
3 Press the 4 button.
When the o mode is selected, the screen for selecting the area to be blurred is displayed.
When the p mode is selected, proceed to Step 6.
108
4 Use the four-way controller
(45) to select an option.
Processes the image so that the top of the image is blurred as if only the bottom of the image is in focus.
Processes the image so that the top and bottom of the image is blurred as if only the center of the image is in focus.
Processes the image so that the bottom of the image is blurred as if only the top of the image is in focus.
MENU OK
5 Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a new image and the following confirmation dialog does not appear.
6 Use the four-way controller (23) to select [Overwrite] or [Save as].
7 Press the 4 button.
The camera returns to Q mode and the processed image is displayed.
5
109
5
Processing Images with the Digital Filters
This function lets you change the color tones and perform special processing on the selected image.
B&W
Sepia
Toy Camera
Retro
Color
Extract Color
Color Emphasis
Soft
Brightness
Processes the image into one that has the look of a black and white photograph.
Processes the image into one that has the look of a sepia photograph.
Processes the image that looks as though it was shot with a toy camera.
Processes the image into one that has the look of an old photo.
Processes the image using the selected color filter. You can choose from six filters: red, pink, purple, blue, green, and yellow.
Extracts only a specific color and processes the rest of the image into black and white. You can choose from three filters: red, green, and blue.
There are four filters: Sky Blue/Fresh Green/Delicate Pink/Autumn
Leaves.
Processes the image into one that appears soft overall.
Adjusts the brightness of the image.
Movies and images taken with another camera cannot be processed using the Digital Filter function.
1 In Q mode, use the four-way controller (45) to choose the image you want to edit.
2 Use the four-way controller (2345) to select P
(Digital Filter) from the Playback Mode Palette.
3 Press the 4 button.
The filter selection screen appears.
1 B&W
2 Sepia
3 Toy Camera
4 Retro
5 Color
6 Extract Color
7 Color Emphasis
8 Soft
9 Brightness
MENU
Subsequent steps vary depending on your selection.
OK
110
To Select a B&W, Sepia or Soft Filter
4 Use the four-way controller (
23
) to choose a filter.
The preview image of the result of the filter effect appears.
5 Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a new image and the following confirmation dialog does not appear.
6 Use the four-way controller ( 23 ) to select [Overwrite] or [Save as].
7 Press the 4 button.
The image processed with the filter is saved.
To Select a Retro, Color, Extract Color or Color Emphasis Filter
4 Use the four-way controller (
23
) to choose a filter.
The preview image of the result of the filter effect appears.
5 Use the four-way controller (
45
) to choose the color.
The color filter changes in the following sequence each time the fourway controller (5) is pressed.
Retro Original image Amber Blue
Color Red Pink Purple Blue Green Yellow
Extract Color Red Green Blue
Color Emphasis Sky Blue Fresh Green Delicate Pink Autumn Leaves
6 Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a new image and the following confirmation dialog does not appear.
7 Use the four-way controller ( 23 ) to select [Overwrite] or [Save as].
8 Press the 4 button.
The image processed with the filter is saved.
5
111
5
To Select a Toy Camera or Brightness Filter
4 Use the four-way controller (23) to choose a filter.
The preview image of the result of the filter effect appears.
5 Use the four-way controller (45) to adjust the effect.
Toy Camera
Brightness
Four-way controller
(4)
Weak
Dark
Default Setting
Standard
Standard
Four-way controller
(5)
Strong
Bright
6 Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a new image and the following confirmation dialog does not appear.
7 Use the four-way controller (23) to select [Overwrite] or [Save as].
8 Press the 4 button.
The image processed with the filter is saved.
Compensating for an Unwanted Red-eye Effect
You can correct images where the flash has caused the subject to appear with red eyes.
The red-eye compensation function can only be used with still pictures taken with this camera. The red-eye compensation function cannot be used on movies and on images where red eyes cannot be detected on the camera.
1 In Q mode, use the four-way controller (45) to choose the image you want to correct.
2 Use the four-way controller (2345) to select Z (Red- eye Compensation) from the Playback Mode Palette.
112
3 Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a new image and the following confirmation dialog does not appear.
4 Use the four-way controller (23) to select [Overwrite] or [Save as].
5 Press the 4 button.
The processed image is saved.
Adding a Frame (Frame Composite)
This function lets you add a decorative frame to still pictures. There are three frames already stored in the camera.
The Frame Composite function cannot be used on images taken with the recorded pixels of n/h, images of size h or smaller with the
4:3 aspect ratio, images of size h or smaller with the 16:9 aspect ratio, and movies.
5
1 In Q mode, use the four-way controller (45) to choose the image to which you want to add a frame.
2 Use the four-way controller (2345) to select N
(Frame Composite) from the Playback Mode Palette.
3 Press the 4 button.
The 12-frame display of the frame selection screen appears.
4 Use the four-way controller
(2345) to choose a frame.
OK
113
5 Press the zoom button
towards the right (y).
The selected frame appears in single-image display.
You can choose another frame using either of the following operations.
Four-way controller (45)
Zoom button towards the left
(f)
Press to choose a different frame.
Returns to the 12-frame display of the frame selection screen, and then lets you choose a different frame in the same way as Step 4.
OK
5
6 Press the 4 button.
The image position and size adjustment screen appears.
You can adjust the image using the following operations.
Four-way controller
(2345)
Zoom button
Press to adjust the position of the image
Makes the image larger or smaller.
MENU OK
7 Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a new image and the following confirmation dialog does not appear.
8 Use the four-way controller (23) to select [Overwrite] or [Save as].
9 Press the 4 button.
The processed image will be saved with the recorded pixels of h for the 4:3 aspect ratio, and h for the 16:9 aspect ratio.
114
Optional Frames
In addition to the built-in frames that come with this camera, there are optional frames included on the supplied CD-ROM. You can save the optional frames to the camera’s built-in memory or an SD Memory Card. To save them to the builtin memory, first remove the SD Memory Card before proceeding.
To Copy Frames
1 Connect the camera to a computer using the provided
USB cable.
Refer to “Connecting to a Computer” (p.137) for instructions on
connecting the camera to a computer.
2 When the device detection window opens, click
[Cancel].
3 Insert the CD-ROM into the CD/DVD drive.
4 When the installer window opens, click [EXIT].
5 Copy the desired files from the FRAME folder in the root directory of the CD-ROM to the FRAME folder on the camera (removable disk).
For information on working with files on a computer, refer to the instruction manual supplied with the computer.
6 Disconnect the USB cable from the computer and camera.
Refer to “Connecting to a Computer” (p.137) for instructions on
disconnecting the cable.
• Frames can be stored both in the built-in memory and on an SD
Memory Card, but using large numbers of frames may slow down processing speed.
5
115
To Use a New Frame
Frames downloaded from the PENTAX website or other source can be used for adding a frame to pictures.
• Extract the downloaded frame and copy it to the FRAME folder in the built-in memory or on the SD Memory Card.
• The FRAME folder is created when the SD Memory Card is formatted with this camera.
• For more information on downloading, refer to the PENTAX website.
• Up to a total of 90 frames including the three default frames can be stored, but using large numbers of frames may slow down processing speed.
5
Editing Movies
You can extract a frame from the recorded movie to save as a still picture or divide a movie into two or more segments.
1 In Q mode, use the four-way controller (45) to choose the movie you want to edit.
2 Use the four-way controller (2345) to select [
(Movie Editing) from the Playback Mode Palette.
3 Press the 4 button.
The movie editing selection screen appears.
Subsequent steps vary depending on your selection.
S a v e a s S t i l l I m a g e
OK
To Save a Frame from a Movie as a Still Picture
4 Select [Save as Still Image] on the movie editing selection screen.
5 Press the 4 button.
The screen appears for selecting a frame to be saved as a still picture.
116
6 Use the four-way controller
(2345) to choose the frame you want to save.
2 Plays or pauses the movie
3 Stops the movie and returns to the first frame
11
4 Reverses the movie frame by frame
MENU
5 Forwards the movie frame by frame
7 Press the 4 button.
The selected frame is saved as a still picture.
OK
To Divide a Movie
4 Select [Divide Movies] on the movie editing selection screen.
5 Press the 4 button.
The screen for choosing the dividing position appears.
6 Use the four-way controller
(2345) to determine the dividing position.
2 Plays or pauses the movie
3 Stops the movie and returns to the first frame
11
MENU
4 Reverses the movie frame by frame
5 Forwards the movie frame by frame
7 Press the 4 button.
A confirmation dialog appears.
OK
5
117
8 Use the four-way controller
(23) to select [Divide].
D i v i d e
C a n c e l
OK
9 Press the 4 button.
The movie is divided at the specified position, each segment is saved as a new file, and the original movie is deleted.
Protected movies cannot be divided.
5
Copying Images
You can copy images from the built-in memory to the SD Memory Card and vice versa. This function can be selected only when an SD Memory
Card has been inserted in the camera.
Make sure that the camera is turned off before inserting or removing the
SD Memory Card.
1 Use the four-way controller (2345) to select p
(Image Copy) from the Playback Mode Palette.
2 Press the 4 button.
The copying method selection screen appears.
Subsequent steps vary depending on your selection.
To Copy Files from the Built-in Memory to the SD Memory Card
All the images in the built-in memory are copied to the SD Memory Card at once. Before copying the images, make sure that there is enough space on the SD Memory Card.
118
3 Use the four-way controller
(23) to select [2}{].
SD
OK
4 Press the 4 button.
All the images are copied to the SD Memory Card.
To Copy Files from the SD Memory Card to the Built-in Memory
Selected images from the SD Memory Card are copied to the built-in memory one by one.
3 Use the four-way controller (23) to select [{}2].
4 Press the 4 button.
5 Use the four-way controller
(45) to select the image you want to copy.
5
MENU OK
6 Press the 4 button.
The selected image is copied to the built-in memory.
To copy other images, repeat Steps 3 to 6. Select [Cancel] to exit the copy operation.
When a file is copied from the SD Memory Card to the built-in memory, it is assigned a new file name.
119
