camera. Pioneer AVIC X1, avic x 1, AVIC-X1

CRD3836A_inst_001_031_UK 1/31/04 12:29 AM Page 16

15

Connecting the System

When connecting a Rear view camera

When using this product with a rear view camera, automatic switching to video from a rear view camera is possible when the gear shift is moved to REVERSE (R) position.

Rear view mode also allows you to check what is behind you while driving.

USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE

MAY RESULT IN INJURY OR DAMAGE.

• The screen image may appear reversed.

• The rear view camera function is to use this product as an aid to keep an eye on trailers, or backing into a tight parking spot. Do not use this function for entertainment purposes.

• The object in rear view may appear closer or more distant than in reality.

• Please note that the edges of the rear view camera images may differ slightly according to whether full screen images are displayed when backing, and whether the images are used for checking the rear when the vehicle is moving forward.

☞

See Page 11.

8 m

Hide-away unit

Note:

It is necessary to set to CAMERA in

SETUP when connecting the rear view camera.

Extension lead

Brown

(for reverse signal)

Fuse resistor

Note:

Do not use other than the supplied extension lead.

Connection method

1.

Clamp the lead.

RCA cable

(sold separately)

Rear view camera

To video output

Note:

Connect to the rear view camera. Do not connect to any other equipment.

2. Clamp firmly with needle-nosed pliers.

ENG/MASTER 96 16