Automatic Degaussing to Remove Colour Patches. Samsung CS21A9W, CS21A8NV, CS-25M6W

Add to My manuals
36 Pages

advertisement

Automatic Degaussing to Remove Colour Patches. Samsung CS21A9W, CS21A8NV, CS-25M6W | Manualzz

Automatic Degaussing to Remove Colour Patches

A degaussing coil is mounted around the picture tube, so you do not normally need to degauss the television manually.

If you move the television to a different position and color patches appear on the screen, you must:

Switch the television off by pressing the “ ” (ON/OFF) button on the front panel

Unplug the television from the wall socket

Leave the television power-off (stand-by) for about 30 minutes so that the automatic degauss function can be activated, and then press the POWER button on the remote control.

If your television will be left unattended, press the “ ” (ON/OFF) button to turn your television off.

ENG

Troubleshooting: Before Contacting Service Personnel

Before contacting Samsung after-sales service, perform the following simple checks.

If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact your local dealer.

No sound or picture

Normal picture but no sound

No picture or black and white picture

Sound and picture interference

Blurred or snowy picture, distorted sound

Remote control malfunctions

◆ Check that the mains lead has been connected to a wall socket.

◆ Check that you have pressed the “ ” (ON/OFF) button.

◆ Check the picture contrast and brightness settings.

◆ Check the volume.

◆ Check the volume.

◆ Check whether the MUTE button has been pressed on the remote control.

◆ Adjust the colour settings.

◆ Check that the broadcast system selected is correct.

◆ Try to identify the electrical appliance that is affecting the television and move it further away.

◆ Plug your television into a different mains socket.

◆ Check the direction, location and connections of your aerial.

This interference is often due to the use of an indoor aerial.

◆ Replace the remote control batteries.

◆ Clean the upper edge of the remote control (transmission window).

◆ Check the battery terminals.

35

- AFTER SALES SERVICE

- Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present.

ELECTRONICS

AA68-00994B (ENG)

advertisement

Related manuals

Download PDF

advertisement