Error messages. Isgus PERFECT 2005, PERFECT 2010
विज्ञापन
विज्ञापन
Error messages
Any error at the unit is indicated by a combination on the display. If the problem cannot be solved, please contact your local sales or service partner.
To avoid any confusion with the date, all error messages begin with the letter E.
Display Reason
P-Module, Error in resident memory.
→ Clocking at the unit is no longer possible.
What can be done
Switch unit off and on.
If the error message is still displayed, the P-Module has to be changed.
→ Please contact servicetechnician.
RTC-Module, Error in real time clock component.
→ Clocking at the unit is no longer possible.
Error in synchronisation of the card lift, mechanical error.
→
Clocking at the unit is no longer possible.
Switch unit off and on.
If the error messages is still displayed, the RTC-module has to be changed
→ Please contact servicetechnician.
Switch unit off and on.
If the error messages is still displayed,
→ Please contact servicetechnician.
Printer head is blocked or runs hard.
→ A piece of paper may be pinched.
Switch off unit.
Remove metal rear cover, swing out programming panel and check card guide.
Switch on unit.
→ If the error message is still displayed, please contact a service-technician.
Program error
→ can only happen during unit is switched on.
Switch unit off and on.
If the error message is still displayed, the P-module of the unit has to be changed.
→ Please contact servicetechnician.
Error messages 19
डाउनलोड
विज्ञापन