Getting Connected to the Internet. ZTE KIS PLUS

Getting Connected to the Internet

Your phone‟s impressive networking capabilities allow you to access the Internet or your corporate network with ease.

You can use default connection settings to connect to the

Internet via your mobile network (GPRS/EDGE/3G), or Wi-Fi.

The GPRS/EDGE/3G connection can be enabled/disabled manually. Just touch the Home Key > > Settings >

Wireless & networks > Mobile networks and tick or clear the Data enabled check box.

Adding a New GPRS/EDGE/3G

Connection

To get connected via GPRS/EDGE/3G you need a data plan with your service provider. Also if the GPRS/EDGE/3G settings are not pre-configured on your phone, please contact your provider to get the necessary information.

1. Touch the Home Key > > Settings > Wireless & networks > Mobile networks > Network Settings >

Access Point Names.

2. Touch New APN.

3. Touch each item to enter the information you get from your service provider.

4. Touch Save to complete.

78

TIP: To set the APN to default settings, touch Reset to

default.

Turning On Wi-Fi

Wi-Fi provides wireless Internet access over distances of up to 300 feet (100 meters).

1. Touch the Home Key > > Settings > Wireless &

networks.

2. Tick the Wi-Fi box to turn it on.

Connecting to a Wi-Fi Network

1. Touch the Home Key > > Settings > Wireless &

networks > Wi-Fi settings.

The WiFi access points, or “hotspots”, that your phone has detected are displayed with their names and security settings.

2. Touch an access point to connect to it.

NOTE: If security features are implemented, you‟ll need to enter a password.

Checking the Wi-Fi Network Status

You can check the Wi-Fi network by looking at the icon in the status bar.

79