advertisement
3 Making telephone calls
3.2
Making external calls
External phone calls are calls to subscribers on your telephone system or to any connection on the public telephone network.
Assuming your DECT telephone system supports them, the following functions can be activated by entering various codes. Please observe the operating instructions for your DECT telephone system.
Input Function
**0
**0
**0
3
**0
7
+ INT key
+
+ R key (flash key)
+ Pause key
+ DTMF dial changeover
+ Pulse dial changeover
**
0 will be sent to the base station
19
Annex
Technical data
Standard: DECT (Digital Enhanced Cordless
Telecommunications, GAP-compatible
Frequency range: 1880 MHz to 1900 MHz
Transmission performance: 10 mW on average
Voice transmission:
Fax mode:
Modem mode:
Dialling mode:
Delivery package:
32 kbit/s ADPCM
Group 3, V.29, 9600 bit/s maximum
9600 bit/s maximum
DTMF (voice frequency signalling)
Connectable telephones: Up to three standard telephones can be connected in parallel
CLIP: Transmission via FSK1; protocol conforms to
ETSI standard
Operating temperature: +10°C to +40°C
20% to 75% Relative humidity:
Permissible storage temperature:
Display unit:
Dimensions:
Weight:
-10°C to +60°C
LED
120 x 100 x 38 mm (W x H x D)
Mounting location:
Power supply:
140 g
Wall mounting in interior rooms
10 V AC (0.12 A zero signal current, 0.4 A maximum); alternatively, 12 V DC +/- 15%
= 10.2-13.8 V (0.12 A zero signal current,
0.4 A maximum)
230 V AC, 50 Hz power supply unit, optional adapter
Product approval/CE mark
Wantec Stefan Rupp hereby declares that the wantecDTL conforms to the fundamental requirements and other relevant regulations stated in Directive
1999/5EU (Radio and Telecommunication Terminal
Equipment, R&TTE). Conformity is declared by the CE mark. The full declaration of conformity can be viewed on the following website: www.
wantec .de
Cleaning
Simply wipe the device with a slightly damp cloth or with an antistatic cloth; do not use a dry cloth. Do not use cleaning or scouring agents.
Technische Änderungen vorbehalten
Subject to changes wantec
Im Riegel 27
73450 Neresheim
+49 (0)7326 964426 0 www.wantec
. de
Bedienungsanleitung wantecDTL
Operating instructions wantecDTL
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 3 Wichtige Information
- 4 Anschlüsse und Anzeigen
- 5 Hörtöne
- 6 Inbetriebnahme
- 6 Montage
- 7 Einbuchung/ Programmierung
- 7 Automatisches Einbuchen
- 7 Programmiermodus
- 8 Programmiermodus aktivieren
- 9 Parametereinstellung im Programmiermodus
- 18 Parameterverzeichnis und Lieferzustand
- 19 Telefonieren
- 19 Nach intern telefonieren
- 20 Nach extern telefonieren
- 23 Important information
- 24 Connections and indicators
- 25 Tones
- 26 Commissioning
- 26 Mounting
- 27 Registration / programming
- 27 Automatic registration
- 27 Programming mode
- 28 Activating programming mode
- 29 Setting parameters in programming mode
- 38 List of parameters and factory settings
- 39 Making telephone calls
- 39 Making internal calls
- 40 Making external calls