advertisement
User’s Manual of GS-4210 Series
The page includes the following fields:
Object
VLAN ID
Port Mask
Description
Display the current VLAN ID
Display the current port mask
4.7.4.6 MLD Forward All
This page provides MLD Forward All. The Forward All screen in Figure 4-7-32 appears.
Figure 4-7-32 Forward All Setting Page Screenshot
The page includes the following fields:
Object
VLAN ID
Port
Membership
Description
Select VLAN ID for this drop down list to assign MLD membership
The switch port number of the logical port
Select MLD membership for each interface:
Forbidden: Interface is forbidden from automatically joining the MLD via MVR.
None:
Static:
Interface is not a member of the VLAN. Packets associated with this VLAN will not be transmitted by the interface.
Interface is a member of the MLD.
175
advertisement
Related manuals
advertisement
Table of contents
- 10 1.1 Packet Contents
- 11 1.2 Product Description
- 14 1.3 How to Use This Manual
- 15 1.4 Product Features
- 18 1.5 Product Specifications
- 21 2.1 Hardware Description
- 21 2.1.1 Switch Front Panel
- 22 2.1.2 LED Indications
- 24 2.1.3 Switch Rear Panel
- 26 2.2 Installing the Switch
- 26 2.2.1 Desktop Installation
- 27 2.2.2 Rack Mounting
- 29 2.2.3 Installing the SFP transceiver
- 32 3.1 Requirements
- 33 3.2 Management Access Overview
- 34 3.3 Administration Console
- 35 3.4 Web Management
- 36 3.5 SNMP-based Network Management
- 36 3.6 PLANET Smart Discovery Utility
- 41 4.1 Main Web Page
- 42 4.1.1 Save Button
- 43 4.1.2 Configuration Manager
- 44 4.1.2.1 Saving Configuration
- 45 4.2 System
- 45 4.2.1 System Information
- 46 4.2.2 IP Configurations
- 48 4.2.3 IPv6 Configuration
- 50 4.2.4 User Configuration
- 51 4.2.5 Time Settings
- 51 4.2.5.1 System Time
- 54 4.2.5.2 SNTP Server Settings
- 55 4.2.6 Log Management
- 55 4.2.6.1 Local Log
- 56 4.2.6.2 Local Log
- 57 4.2.6.3 Remote Syslog
- 59 4.2.6.4 Log Message
- 61 4.2.7 SNMP Management
- 61 4.2.7.1 SNMP Overview
- 62 4.2.7.2 SNMP System Information
- 62 4.2.7.3 SNMP View
- 64 4.2.7.4 SNMP Access Group
- 66 4.2.7.5 SNMP Community
- 67 4.2.7.6 SNMP User
- 69 4.2.7.7 SNMPv1, 2 Notification Recipients
- 70 4.2.7.8 SNMPv3 Notification Recipients
- 71 4.2.7.9 SNMP Engine ID
- 72 4.2.7.10 SNMP Remote Engine ID
- 74 4.3 Port Management
- 74 4.3.1 Port Configuration
- 76 4.3.2 Port Counters
- 81 4.3.3 Bandwidth Utilization
- 82 4.3.4 Port Mirroring
- 84 4.3.5 Jumbo Frame
- 85 4.3.6 Port Error Disabled Configuration
- 87 4.3.7 Port Error Disabled
- 87 4.3.8 Protected Ports
- 90 4.3.9 EEE
- 91 4.3.10 SFP Module Information
- 91 4.3.10.1 SFP Module Status
- 93 4.3.10.1 SFP Module Detail Status
- 94 4.4 Link Aggregation
- 96 4.4.1 LAG Setting
- 97 4.4.2 LAG Management
- 98 4.4.3 LAG Port Setting
- 100 4.4.4 LACP Setting
- 101 4.4.5 LACP Port Setting
- 102 4.4.6 LAG Status
- 105 4.5 VLAN
- 105 4.5.1 VLAN Overview
- 106 4.5.2 IEEE 802.1Q VLAN
- 110 4.5.3 Management VLAN
- 111 4.5.4 Create VLAN
- 112 4.5.5 Interface Settings
- 116 4.5.6 Port to VLAN
- 117 4.5.7 Port VLAN Membership
- 118 4.5.8 Protocol VLAN Group Setting
- 120 4.5.9 Protocol VLAN Port Setting
- 121 4.5.10 GVRP Setting
- 123 4.5.11 GVRP Port Setting
- 124 4.5.12 GVRP VLAN
- 125 4.5.13 GVRP Statistics
- 127 4.5.14 VLAN setting example
- 127 4.5.14.1 Two separate 802.1Q VLANs
- 130 4.5.14.2 VLAN Trunking between two 802.1Q aware switches
- 133 4.6 Spanning Tree Protocol
- 133 4.6.1 Theory
- 140 4.6.2 STP Global Settings
- 142 4.6.3 STP Port Setting
- 145 4.6.4 CIST Instance Setting
- 147 4.6.5 CIST Port Setting
- 149 4.6.6 MST Instance Configuration
- 151 4.6.7 MST Port Setting
- 153 4.6.8 STP Statistics
- 154 4.7 Multicast
- 154 4.7.1 Properties
- 155 4.7.2 IGMP Snooping
- 159 4.7.2.1 IGMP Setting
- 161 4.7.2.2 IGMP Querier Setting
- 162 4.7.2.3 IGMP Static Group
- 163 4.7.2.4 IGMP Group Table
- 164 4.7.2.5 IGMP Router Setting
- 165 4.7.2.6 IGMP Router Table
- 166 4.7.2.7 IGMP Forward All
- 167 4.7.3 IGMP Snooping Statics
- 169 4.7.4 MLD Snooping
- 169 4.7.4.1 MLD Setting
- 171 4.7.4.2 MLD Static Group
- 172 4.7.4.3 MLD Group Table
- 172 4.7.4.4 MLD Router Setting
- 174 4.7.4.5 MLD Router Table
- 175 4.7.4.6 MLD Forward All
- 176 4.7.5 MLD Snooping Statics
- 178 4.7.6 Multicast Throttling Setting
- 179 4.7.7 Multicast Filter
- 180 4.7.7.1 Multicast Profile Setting
- 181 4.7.7.2 IGMP Filter Setting
- 182 4.7.7.3 MLD Filter Setting
- 184 4.8 Quality of Service
- 184 4.8.1 Understanding QoS
- 185 4.8.2 General
- 185 4.8.2.1 QoS Properties
- 186 4.8.2.2 QoS Port Settings
- 187 4.8.2.3 Queue Settings
- 188 4.8.2.4 CoS Mapping
- 190 4.8.2.5 DSCP Mapping
- 191 4.8.2.6 IP Precedence Mapping
- 193 4.8.3 QoS Basic Mode
- 193 4.8.3.1 Global Settings
- 194 4.8.3.2 Port Settings
- 195 4.8.4 Rate Limit
- 195 4.8.4.1 Ingress Bandwidth Control
- 196 4.8.4.2 Egress Bandwidth Control
- 197 4.8.4.3 Egress Queue
- 198 4.8.5 Voice VLAN
- 198 4.5.8.1 Introduction to Voice VLAN
- 199 4.8.5.2 Properties
- 200 4.8.5.3 Telephony OUI MAC Setting
- 202 4.8.5.4 Telephony OUI Port Setting
- 204 4.9 Security
- 204 4.9.1 802.1X
- 205 4.9.1.1 Understanding IEEE 802.1X Port-based Authentication
- 208 4.9.1.2 802.1X Setting
- 209 4.9.1.3 802.1X Port Setting
- 211 4.9.1.4 Guest VLAN Setting
- 213 4.9.1.5 Authenticated Host
- 214 4.9.2 RADIUS Server
- 217 4.9.3 TACACS+ Server
- 219 4.9.4 AAA
- 220 4.9.4.1 Login List
- 221 4.9.4.2 Enable List
- 222 4.9.5 Access
- 222 4.9.5.1 Telnet
- 223 4.9.5.2 SSH
- 225 4.9.5.3 HTTP
- 226 4.9.5.4 HTTPs
- 227 4.9.6 Management Access Method
- 227 4.9.6.1 Profile Rules
- 229 4.9.6.2 Access Rules
- 230 4.9.7 DHCP Snooping
- 230 4.9.7.1 DHCP Snooping Overview
- 231 4.9.7.2 Global Setting
- 232 4.9.7.3 DHCP Snooping VLAN Setting
- 234 4.9.7.4 Port Setting
- 236 4.9.7.5 Statistics
- 237 4.9.7.6 Database Agent
- 239 4.9.7.7 Rate Limit
- 240 4.9.7.8 Option82 Global Setting
- 241 4.9.7.9 Option82 Port Setting
- 243 4.9.7.10 Option82 Circuit-ID Setting
- 244 4.9.8 Dynamic ARP Inspection
- 244 4.9.8.1 Global Setting
- 245 4.9.8.2 VLAN Setting
- 246 4.9.8.3 Port Setting
- 248 4.9.8.4 Statistics
- 249 4.9.8.5 Rate Limit
- 250 4.9.9 IP Source Guard
- 251 4.9.9.1 Port Settings
- 253 4.9.9.2 Binding Table
- 254 4.9.10 Port Security
- 256 4.9.11 DoS
- 256 4.9.11.1 Global DoS Setting
- 259 4.9.11.2 DoS Port Setting
- 260 4.9.12 Storm Control
- 260 4.9.12.1 Global Setting
- 261 4.9.12.2 Port Setting
- 263 4.10 ACL
- 264 4.10.1 MAC-based ACL
- 265 4.10.2 MAC-based ACE
- 268 4.10.3 IPv4-based ACL
- 269 4.10.4 IPv4-based ACE
- 274 4.10.5 IPv6-based ACL
- 275 4.10.6 IPv6-based ACE
- 280 4.10.7 ACL Binding
- 281 4.11 MAC Address Table
- 282 4.11.1 Static MAC Setting
- 283 4.11.2 MAC Filtering
- 284 4.11.3 Dynamic Address Setting
- 285 4.11.4 Dynamic Learned
- 287 4.12 LLDP
- 287 4.12.1 Link Layer Discovery Protocol
- 288 4.12.2 LLDP Global Setting
- 290 4.12.3 LLDP Port Setting
- 293 4.12.4 LLDP Local Device
- 295 4.12.5 LLDP Remove Device
- 296 4.12.6 MED Network Policy
- 300 4.12.7 MED Port Setting
- 303 4.12.8 LLDP Overloading
- 304 4.12.9 LLDP Statistics
- 306 4.13 Diagnostics
- 306 4.13.1 Cable Diagnostics
- 308 4.13.2 Ping
- 308 4.13.3 Ping Test
- 309 4.13.4 IPv6 Ping Test
- 310 4.13.5 Trace Router
- 311 4.14 RMON
- 311 4.14.1 RMON Statistics
- 313 4.14.2 RMON Event
- 314 4.14.3 RMON Event Log
- 315 4.14.4 RMON Alarm
- 318 4.14.5 RMON History
- 319 4.14.6 RMON History Log
- 320 4.15 Power over Ethernet
- 321 4.15.1 Power over Ethernet Powered Device
- 322 4.15.2 System Configuration
- 323 4.15.3 Power over Ethernet Configuration
- 326 4.15.4 PoE Schedule
- 329 4.15.5 PoE Alive Check Configuration
- 331 4.16 Maintenance
- 331 4.16.1 Factory Default
- 332 4.16.2 Reboot Switch
- 332 4.16.3 Backup Manager
- 333 4.16.4 Upgrade Manager
- 334 4.16.5 Dual Image
- 336 5.1 Address Table
- 336 5.2 Learning
- 336 5.3 Forwarding & Filtering
- 336 5.4 Store-and-Forward
- 337 5.5 Auto-Negotiation
- 340 A.1 1000Mbps, 1000BASE-T
- 340 A.2 10/100Mbps, 10/100BASE-TX