advertisement
User’s Manual of GS-4210 Series
4.15.4 PoE Schedule
This page allows the user to define PoE schedule and scheduled power recycling.
PoE Schedule
Besides being used as an IP Surveillance, the Managed PoE switch is certainly applicable to construct any PoE network including VoIP and Wireless LAN. Under the trend of energy saving worldwide and contributing to the environmental protection on the Earth, the Managed PoE switch can effectively control the power supply besides its capability of giving high watts power.
The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMB or Enterprise saving power and money.
Scheduled Power Recycling
The Managed PoE switch allows each of the connected PoE IP cameras to reboot at a specified time each week. Therefore, it will reduce the chance of IP camera crash resulting from buffer overflow.
326
The screen in Figure 4-16-4 appears.
User’s Manual of GS-4210 Series
Figure 4-16-4: PoE Schedule Screenshot
Please press Add New Rule button to start setting PoE Schedule function. You have to set PoE schedule to profile and then go back to PoE Port Configuration, and select “Schedule” mode from per port “PoE Mode” option to enable you to indicate which schedule profile could be applied to the PoE port.
The page includes the following fields:
Object
Profile
Week Day
Start Hour
Description
Set the schedule profile mode. Possible profiles are:
Profile1
Profile2
Profile3
Profile4
Allows user to set week day for defining PoE function by enabling it on the day.
Allows user to set what hour PoE function does by enabling it.
327
Start Min
End Hour
End Min
Reboot Enable
Reboot Only
Buttons
Reboot Hour
Reboot Min
: Click to add new rule.
: Click to apply changes
: Check to delete the entry.
User’s Manual of GS-4210 Series
Allows user to set what minute PoE function does by enabling it.
Allows user to set what hour PoE function does by disabling it.
Allows user to set what minute PoE function does by disabling it.
Allows user to enable or disable the whole PoE port reboot by PoE reboot schedule.
Please note that if you want PoE schedule and PoE reboot schedule to work at the same time, please use this function, and don’t use Reboot Only function. This function offers administrator to reboot PoE device at an indicated time if administrator has this kind of requirement.
Allows user to reboot PoE function by PoE reboot schedule. Please note that if administrator enables this function, PoE schedule will not set time to profile. This function is just for PoE port to reset at an indicated time.
Allows user to set what hour PoE reboots. This function is only for PoE reboot schedule.
Allows user to set what minute PoE reboots. This function is only for PoE reboot schedule.
328
advertisement