- No category
advertisement
PCI-1202/1602/1800/1802 Hardware User’s Manual
2.3.5 DB-16P Isolated Input Board
The DB-16P is a 16-channel isolated digital input daughter board. The optically isolated inputs of the DB-16P consists are bi-directional optocoupler with resistor for current sensing.
You can use the DB-16P to sense DC signal from TTL levels up to 24V or use the DB-16P to sense a wide range of AC signals. You can use this board to isolate the computer from large common-mode voltage, ground loops and transient voltage spike that often occur in industrial environments.
Opto-Isolated
PCI-1202
(H/L/HU/LU)
PCI-1800/1802
(H/L)
D/I
D/I 20-Pin cable
PCI-1202
(H/L/HU/LU)
PCI-1800/1802
(H/L)
AC or DC Signal 0V to 24V
R
V+
V-
DB-16P
Version: 3.8 (Mar.2007, PPH-014-38) ---- 21
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 5 INTRODUCTION
- 8 Power Consumption
- 8 Analog Inputs
- 9 A/D Converter
- 10 A/D Trigger Methods
- 11 A/D Throughput
- 12 D/A Converter
- 13 Digital I/O
- 13 Interrupt Channel
- 13 Programmable Timer/Counter
- 15 HARDWARE CONFIGURATION
- 19 JP1 : A/D Input Type Selection
- 19 J1 : D/A Reference Voltage Selection
- 19 2.2.3 D/I Port Setting (PCI-1202HU/LU only)
- 21 DB-16P Isolated Input Board
- 22 DB-16R Relay Board
- 23 DB-24PR Power Relay Board
- 31 I/O CONTROL REGISTER
- 38 The control register
- 59 The status register
- 60 The A/D software trigger register
- 64 A/D CONVERSION OPERATION
- 71 The MagicScan Circular_Scan_Queue
- 72 The Digital Filter of MagicScan
- 72 The Different Sampling Rate of MagicScan
- 73 The High/Low Alarm of MagicScan
- 74 The MagicScan Function
- 76 The MagicScan Thread
- 79 M_FUNCTION
- 84 CONTINUOUS CAPTURE FUNCTIONS
- 90 CALIBRATION