Fixture Linking. SHOWTEC 60449
Add to My manuals16 Pages
SHOWTEC 60449 is a Mirrorball Motor DMX 2 channel.
advertisement
Mirrorball Motor DMX 2 channel
Fixture Linking
You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to run synchronized shows of two or more fixtures set to a master/slave operating mode. The combined number of channels required by all the fixtures on a serial data link determines the number of fixtures the data link can support.
Important: Fixtures on a serial data link must be daisy-chained in a single line. To comply with the
EIA-485 standard, no more than 30 devices should be connected on one data link.
Connecting more than 30 fixtures on one serial data link without the use of a DMX optically isolated splitter may result in deterioration of the digital DMX signal.
Maximum recommended DMX data link distance: 100 meters
Maximum recommended number of fixtures on a DMX data link: 30 fixtures
Data Cabling
To link fixtures together, you must obtain data cables. You can purchase DAP Audio certified DMX cables directly from a dealer/distributor or construct your own cable. If you choose to create your own cable, please use data-grade cables that can carry a high quality signal and are less prone to electromagnetic interference.
DAP Audio DMX Data Cables
• DAP Audio Basic microphone cable for allround use. bal. XLR/M 3-pin > XLR/F 3-pin.
Ordercode FL01150 (1,5 m), FL013 (3 m), FL016 (6 m), FL0110 (10 m), FL0115 (15 m), FL0120 (20 m).
• DAP Audio X-type data cable XLR/M 3-pin > XLR/F 3-pin. Ordercode FLX0175 (0,75 m),
FLX01150 (1,5 m), FLX013 (3 m), FLX016 (6 m), FLX0110 (10 m).
• DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by
Neutrik®. Ordercode FL71150 (1,5 m), FL713 (3 m), FL716 (6 m), FL7110 (10 m).
• DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by
Neutrik®. Ordercode FL7275 (0,75 m), FL72150 (1,5 m), FL723 (3 m), FL726 (6 m), FL7210 (10 m).
• DAP Audio 110 Ohm cable with digital signal transmission. Ordercode FL0975 (0,75 m),
FL09150 (1,5 m), FL093 (3 m), FL096 (6 m), FL0910 (10 m), FL0915 (15 m), FL0920 (20 m).
DMX Channels
2 Channels
Channel 1 – Lamp ON/OFF
0-127
128-255
Lamp OFF
Lamp ON
Channel 2 – Motor rotation
0
1-127
Not functional
Clockwise rotation, from fast to slow
128
129-255
Stop
Counterclockwise rotation, from slow to fast
Ordercode: 60499 12
advertisement
Related manuals
advertisement
Table of contents
- 3 Warning
- 3 Safety Instructions
- 5 Operating Determinations
- 5 Rigging
- 6 Connection with the mains
- 7 Return Procedure
- 7 Claims
- 8 Description of the device
- 8 Features
- 8 Frontside
- 9 Backside
- 9 Installation
- 9 Set Up and Operation
- 10 Control Modes
- 10 One Mirrorball Motor (Stand-alone)
- 10 Multiple Mirrorball Motors (Master / Slave Control)
- 11 Multiple Mirrorball Motors (DMX control)
- 13 Fixture Linking
- 13 Data Cabling
- 13 DMX Channels
- 13 2 Channels
- 14 Maintenance
- 14 Troubleshooting
- 14 No Light
- 15 Product Specifications