Turning the ALC (Auto Level Control) on and off. Yamaha POCKETRAK C24, W24

3

Recording Settings

Turning the ALC (Auto Level Control) on and off

Note:

· You can turn the ALC function on or off when recording audio to folders A–D.

• Turning the ALC function on

Slide the [ALC] switch located on the side panel of the unit to “ON.”

The recording level will automatically be adjusted in response to the input level.

ALC ON

AUTO

PCM

A

44.1K

16bit

L

7/7

091101_1746.WAV

L

R

0:00:00

0:03

• Turning the ALC function off

Slide the [ALC] switch (located on the side panel of the unit) to “OFF.”

You can change the recording level in increments (Refer to the Owner’s Manual).

ALC OFF

(The recording level will be displayed.)

40

PCM

A

44.1K

16bit

L

7/7

091101_1746.WAV

L

R

0:00:00

0:03

Note:

· You cannot adjust the recording level when you are recording audio from a connected

external device (see page 10

).

Setting the microphone sensitivity (MIC SENS)

You can set the microphone sensitivity level to high or low to accommodate the recording environment.

• If the volume level of the recording source is too low:

Slide the [MIC SENS] switch (located on the side panel) to [HIGH].

• If the volume level of the recording source is too high:

Slide the [MIC SENS] switch (located on the side panel) to [LOW].

The indicator displayed in the upper right of the LCD:

When the [MIC SENS] switch is set to [HIGH]:

H

When the [MIC SENS] switch is set to [LOW]:

L

POCKETRAK W24 Reference Manual

17