Auxiliary Settings Linear, 2-Position, 3-Position. Spektrum DX3E, DX3E DSM 3-Channel Transmitter Only, DX3E 3-Channel DSM Surface Radio

auxIlIary seTTIngs lInear,

2-PosITIon, 3-PosITIon

The Auxiliary channel can be selected to operate in three different methods:

2-Position (2P) - The servo travels to its opposite endpoints when the auxiliary button is pressed. Ideal for forward and reverse transmissions and some two speed transmissions.

3-Position (3P) - The servo travels from endpoint to center to the opposite endpoint when the auxiliary button is pressed. Used for forward, neutral and reverse transmissions and some 3-speed transmissions.

Linear (LIN) - This allows the servo position to be controlled proportionately. Ideal for mixture control on engines.

Auxiliary Setting

Switch

Travel adJusT

Travel adjust is used to limit the maximum travel that each channel will travel in each direction. Travel adjust is independently adjustable in each direction. To reduce the maximum travel in each direction, use your finger or a small screwdriver to rotate the corresponding travel adjust dial counterclockwise. To increase travel in each direction, rotate the corresponding dial clockwise.

Travel Adjust

Steering Left

Travel Adjust

Throttle Forward

Travel Adjust

Steering Right

Travel Adjust

Aux High

Travel Adjust

Throttle Reverse

Travel Adjust

Aux Low

EN

Note that the servo reversing and travel adjust functions are used to adjust the endpoints and direction of the auxiliary channel.

SPEKTRUM DX3E USER GUIDE 9