ELECTRONIC ELECTRIC DRYER SÉCHEUSE ÉLECTRIQUE

4

INSTALLATION INSTRUCTIONS

■

■

■

Tools and Parts

Gather the required tools and parts before starting installation.

Read and follow the instructions provided with any tools listed here.

■

■

Flat-blade screwdriver

#2 Phillips screwdriver

Adjustable wrench that opens to 1" (2.54 cm) or hex-head socket wrench

(for adjusting dryer feet)

Level

Vent clamps

■

■

■

■

Caulking gun and compound (for installing new exhaust vent)

Tin snips (new vent installations)

¼" nut driver or socket wrench (recommended)

Tape measure

Parts supplied

Remove parts packages from dryer drum. Check that all parts are included.

■ Parts package.

Optional Pedestal

Are you placing the dryer on a pedestal? You have the option of purchasing pedestals of different heights separately for this dryer.

You may select a 10" (25.4 cm) pedestal or a 15.5" (39.4 cm) pedestal with a shelf and bin dividers. These pedestals will add to the total height of the dryer for a total height of approximately 46"

(116.8 cm) or 51.5" (130.8 cm), respectively.

For a garage installation, you will need to place the dryer at least

18" (46 cm) above the floor.

Optional pedestal (15.5" [39.4 cm] model shown)

To order, call the dealer from whom you purchased your dryer or refer to the “Assistance or Service” section.

Color Part Number Pedestal

Height

10" (25.4 cm)

15.5" (39.4 cm) with shelf and bin dividers

White

White

WHP1000SQ

WHP1500SQ

4 Leveling legs

NOTE: Do not use leveling legs if installing the dryer on a pedestal.

Parts needed

Check local codes. Check existing electrical supply and venting.

See “Electrical Requirements” and “Venting Requirements” before purchasing parts.

■ For close-clearance installations between 28.65" (72.77 cm) and 34.15" (86.74 cm), see “Plan Vent System” section for venting requirements.

Drying Rack

To order a drying rack, call the dealer from whom you purchased your dryer or refer to the “Assistance or Service” section. Ask for

Part Number 8563738. For more information, see “Drying Rack

Option.”

Stack Kit

Are you planning to stack your DUET SPORT™ washer and dryer? To do so, you will need to purchase a Stack Kit.

To order, call the dealer from whom you purchased your dryer or refer to the “Assistance or Service” section. Ask for Part Number

8572546.

34.15"

(86.74 cm)

Mobile home installations require metal exhaust system hardware available for purchase from the dealer from whom you purchased your dryer. For further information, please refer to the “Assistance or Service” section.