Basic operation. Fagor CNC 8055 para otras aplicaciones, CNC 8055 para fresadoras, CNC 8055 for milling machines, CNC 8055 for other applications

Programming manual

10.1.1

Basic operation

1.

Multiple machining calculates the next point of those programmed where it is wished to machine.

2.

Rapid traverse (G00) to this point.

3.

Multiple machining will perform the canned cycle or modal subroutine selected after this movement.

4.

The CNC will repeat steps 1-2-3 until the programmed path has been completed.

After completing multiple machining, the tool will be positioned at the last point along the programmed path where machining was performed.

Programming example assuming that the work plane is formed by the X and Y axes, that the Z axis is the longitudinal axis and that the starting point is X0 Y0 Z0:

10.

; Canned cycle positioning and definition.

G81 G98 G00 G91 X200 Y300 Z-8 I-22 F100 S500

; Defines multiple machining.

G60 A30 X1200 I100 P2.003 Q6 R12

; Cancels the canned cycle.

G80

; Positioning.

G90 X0 Y0

; End of program.

M30

It is also possible to write the multiple machining definition block in the following ways:

G60 A30 X1200 K13 P2.003 Q6 R12

G60 A30 I100 K13 P2.003 Q6 R12

CNC 8055

CNC 8055i

·M· & ·EN· M ODELS

S OFT : V01.6

X

·203·