Image Stitch Window. Canon PIXMA MG2550S, PIXMA G4410 - Mac, PIXMA MG2520 (MG2500 Series), PIXMA MG2545S, PIXMA MG2540S, PIXMA MG2500 serie, PIXMA MG2555, PIXMA MG2550, PIXMA MG2522, PIXMA MG2540

Image Stitch Window

Click Stitch in the IJ Scan Utility main screen to display the Image Stitch window.

You can scan the left and right halves of an item larger than the platen and combine the images back into one image. You can scan items up to approximately twice as large as the platen.

(1) Settings and Operation Buttons

(2) Toolbar

(3) Thumbnail View Area

(4) Preview Area

Note

The displayed items vary depending on the select source and view.

(1) Settings and Operation Buttons

• Select Output Size

• B4 (B5 x 2)

Scans the left and right halves of a B4 size item separately.

• A3 (A4 x 2)

Scans the left and right halves of an A3 size item separately.

• 11 x 17 (Letter x 2)

Scans the left and right halves of an item twice as large as Letter size separately.

495

• Full Platen x 2

Scans the left and right halves of an item twice as large as the platen separately.

• Scan Direction

• Scan from Left

Displays the first scanned image on the left side.

• Scan from Right

Displays the first scanned image on the right side.

• Scan Image 1

• Start Scanning Image 1

Scans the first item.

• Scan Image 2

• Start Scanning Image 2

Scans the second item.

496

• Adjust cropping frames

You can adjust the scan area in preview.

If no area is specified, the image of the size selected in Select Output Size will be saved. If an area is specified, only the image in the cropping frame will be scanned and saved.

Adjusting Cropping Frames in the Image Stitch Window

• Save

• Save

Saves the two scanned images as one image.

• Cancel

Cancels Stitch scan.

(2) Toolbar

• Toolbar

You can delete the scanned images or adjust the previewed images.

• (Delete)

Deletes the scanned image.

• (Enlarge/Reduce)

Allows you to enlarge or reduce the preview image.

Left-clicking the Preview area enlarges the displayed image.

Right-clicking the Preview area reduces the displayed image.

497

• (Rotate Left)

Rotates the preview image 90 degrees counter-clockwise.

• (Invert Vertically)

Rotates the preview image 180 degrees.

• (Rotate Right)

Rotates the preview image 90 degrees clockwise.

• (Open Guide)

Opens this page.

(3) Thumbnail View Area

• Thumbnail View Area

Displays the thumbnails of the scanned images. Appears blank if none has been scanned.

(4) Preview Area

• Preview Area

Displays the scanned images. You can adjust the layout by dragging the scanned

image or check the results of the settings made in " (1) Settings and Operation Buttons

."

• When no image has been scanned

• After scanning the first item by clicking Start Scanning Image 1

498

The image is scanned in the direction specified in Scan Direction, and 2 appears next to it.

• After scanning the second item by clicking Start Scanning Image 2

The two scanned images appear.

Related Topic

Scanning Items Larger than the Platen (Image Stitch)

499