Position display mode. Fagor CNC 8055 para otras aplicaciones, CNC 8055 para fresadoras, CNC 8055 for milling machines, CNC 8055 for other applications

4.

4.2.2

Position display mode

This display mode shows the position values of the axes.

This display mode shows the following fields or windows:

Operating manual

CNC 8055

CNC 8055i

·M· & ·EN· M ODELS

S OFT : V01.6

X

·62·

• The real position values for the axes that indicate the current position of the machine.

It must be borne in mind that the display format for the axes is established by machine parameter

"DFORMAT" and that real or theoretical position values will be shown depending on the setting of machine parameter "THEODPLY".

Each axis is provided with the following fields:

PART ZERO This field shows the real axis position with respect to part zero.

MACHINE ZERO This field shows the real axis position with the respect to machine reference zero (home).

4.2.3

Part-program display

Displays a page of program blocks among which the block being executed is highlighted.