Global and local parameters tables. Fagor CNC 8055 para otras aplicaciones, CNC 8055 para fresadoras, CNC 8055 for milling machines, CNC 8055 for other applications
Add to My manuals246 Pages
advertisement
7.
Operating manual
7.5
Global and local parameters tables
The CNC has two types of general purpose variables:
• Local parameters P0-P25 (7 levels).
• Global parameters P100-P299.
The CNC updates the parameter tables after carrying out the operations indicated in the block in preparation. This operation is always carried out before executing the block. Therefore, the values shown in the table may not coincide with those of the block being executed.
If the execution mode is abandoned after interrupting the execution of the program, the CNC will update the parameter tables with values corresponding to the block that was being executed.
In the global and local parameter tables, the values of the parameters may be displayed in decimal
(4127.423) or in scientific notation (0.23476 E-3).
The CNC generates a new nesting level of local parameters every time parameters are assigned to a subroutine. Up to a maximum of 6 nesting levels of local parameters are possible.
When the machining canned cycles: G66, G68, G69, G81, G82, G83, G84, G85, G86, G87, G88 and G89 are active, they use the sixth nesting level of local parameters.
To access the different local parameter tables, the corresponding level must be indicated (0 through
6).
While programming in high level, local parameters may be referred to as P0-P25, or as A-Z,"A" being the same as "P0" and "Z" the same as "P25".
That is why the local parameter tables show the parameter number next to their associated letter
(between parenthesis). In the tables, the parameter can only referred to as P0-P25, letters are not allowed.
CNC 8055
CNC 8055i
·M· & ·EN· M ODELS
S OFT : V01.6
X
·134·
advertisement
Related manuals
advertisement
Table of contents
- 7 About the product
- 9 Declaration of conformity
- 11 Version history
- 13 Safety conditions
- 17 Warranty terms
- 19 Material returning terms
- 21 Additional remarks
- 23 Fagor documentation
- 26 Part programs
- 28 Monitor information layout
- 30 Keyboard layout
- 31 The EDIT, SIMUL and EXEC keys
- 33 Layout of the operator panel
- 36 Help systems
- 38 Software update
- 39 KeyCF (KeyCompactFlash)
- 40 Directory structure
- 44 Remote hard disk
- 45 Connection to a PC through WinDNC
- 46 Access the CNC's hard disk from a PC
- 53 Block search. Switching from simulation to execution
- 54 Operating modes
- 56 Automatic block search
- 57 Manual block search
- 59 Home searching restrictions
- 59 Disabling the simulation and block search modes
- 60 Display
- 61 Standard display mode
- 62 Position display mode
- 62 Part-program display
- 63 Subroutine display mode
- 65 Following error display mode
- 65 User display mode
- 66 Execution time display mode
- 68 Tool inspection
- 71 Graphics
- 72 Type of graphic
- 75 Display area
- 77 Viewpoint
- 78 Graphic parameters
- 80 Clear screen
- 80 Deactivate graphics
- 81 Measurement
- 82 Single block
- 85 Editing in CNC language
- 86 TEACH-IN editing
- 87 Interactive editor
- 88 Profile editor
- 100 Modify
- 102 Replace
- 103 Delete block
- 104 Move block
- 105 Copy block
- 106 Copy to program
- 107 Import a program
- 108 Editor parameters
- 108 Autonumbering
- 109 Selection of the axes for TEACH-IN editing
- 117 Continuous Jog
- 118 Incremental jog
- 119 Path-jog mode
- 120 Movement with an electronic handwheel
- 121 General or individual handwheel mode
- 122 Path handwheel
- 123 Feed handwheel mode
- 124 "Additive handwheel" mode
- 126 Spindle movement
- 129 Zero offset table
- 130 Tool magazine table
- 131 Tool table
- 133 Tool Offset table
- 134 Global and local parameters tables
- 135 How to edit tables
- 138 Accessing the programs without using the explorer
- 138 Directory
- 142 Delete
- 143 Rename
- 144 Protections
- 146 Change date
- 147 Accessing the programs using the explorer
- 153 Data safety backup. Backup - Restore
- 158 Phone call (telediagnosis)
- 159 Sercos
- 166 Compile
- 167 Monitoring
- 172 Monitoring with the PLC in operation and with the PLC stopped
- 174 PLC monitoring in ladder diagram language
- 177 Active messages
- 177 Active pages (screens)
- 177 Save program
- 178 Restore program
- 178 Resources in use
- 179 Statistics
- 181 Logic analyzer
- 181 Description of the work screen
- 183 Selection of variables and trigger conditions
- 186 Execute trace
- 193 Utilities
- 195 Editing user screens (pages) and symbols
- 198 Graphic elements
- 202 Texts
- 204 Modifications
- 208 Machine parameter table
- 209 Miscellaneous function tables "M
- 210 Leadscrew error compensation tables
- 211 Cross compensation table
- 212 Operation with parameter tables
- 216 Configuration
- 217 Hardware test
- 218 Tests
- 219 Adjustments
- 219 Circle geometry test
- 221 Oscilloscope
- 230 Hard disk
- 231 Interesting notes
- 235 Direct connection through the serial line or Ethernet
- 236 Telephone connection from a PC
- 237 Normal phone call
- 238 Advanced phone call
- 240 Configuration of an incoming connection at the PC
- 242 Internet phone call