- Computers & electronics
- Computers
- Notebooks
- HP
- Pro x2 612 G2 Retail Solution with Retail Case
- User guide
Power cord set requirements. HP Pro x2 612 G2, Pro x2 612 G2 Retail Solution with Retail Case
Add to My manuals105 Pages
advertisement
![Power cord set requirements. HP Pro x2 612 G2, Pro x2 612 G2 Retail Solution with Retail Case | Manualzz Power cord set requirements. HP Pro x2 612 G2, Pro x2 612 G2 Retail Solution with Retail Case | Manualzz](http://s3.manualzz.com/store/data/025171895_1-3164e70c727ecb1613cf424b53a1273c-360x466.png)
11 Power cord set requirements
The wide-range input feature of the computer permits it to operate from any line voltage from 100 to 120 V ac, or from 220 to 240 V ac.
The 3-conductor power cord set included with the computer meets the requirements for use in the country or region where the equipment is purchased.
Power cord sets for use in other countries or regions must meet the requirements of the country and region where the computer is used.
Requirements for all countries
The following requirements are applicable to all countries and regions:
● The length of the power cord set must be at least 1.0 m (3.3 ft) and no more than 2.0 m (6.5 ft).
● All power cord sets must be approved by an acceptable accredited agency responsible for evaluation in the country or region where the power cord set will be used.
● The power cord sets must have a minimum current capacity of 10 A and a nominal voltage rating of 125 or 250 V ac, as required by the power system of each country or region.
● The appliance coupler must meet the mechanical configuration of an EN 60 320/IEC 320 Standard Sheet
C13 connector for mating with the appliance inlet on the back of the computer.
86 Chapter 11 Power cord set requirements
Requirements for specific countries and regions
Country/region Accredited agency Applicable note number
Argentina
Australia
Austria
Belgium
Brazil
Canada
Chile
Denmark
Finland
France
Germany
India
Israel
Italy
Japan
The Netherlands
SII
IMQ
JIS
KEMA
FIMKO
UTE
VDE
ISI
IRAM
SAA
OVE
CEBEC
ABNT
CSA
IMQ
DEMKO
1
1
3
1
1
1
1
1
1
2
1
1
1
1
1
1
New Zealand
Norway
The People's Republic of China
Saudi Arabia
Singapore
South Africa
South Korea
Sweden
SANZ
NEMKO
CCC
SASO
PSB
SABS
KTL
SEMKO
1
1
5
1
1
1
4
7
Switzerland
Taiwan
Thailand
The United Kingdom
SEV
BSMI
TISI
ASTA
1
6
1
1
The United States UL 2
1.
The flexible cord must be Type HO5VV-F, 3-conductor, 0.75 mm² conductor size. Power cord set fittings (appliance coupler and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it will be used.
2.
The flexible cord must be Type SVT/SJT or equivalent, No. 18 AWG, 3-conductor. The wall plug must be a two-pole grounding type with a NEMA 5-15P (15 A, 125 V ac) or NEMA 6-15P (15 A, 250 V ac) configuration. CSA or C-UL mark. UL file number must be on each element.
Requirements for specific countries and regions 87
Country/region Accredited agency Applicable note number
3.
The appliance coupler, flexible cord, and wall plug must bear a “T” mark and registration number in accordance with the Japanese
Dentori Law. The flexible cord must be Type VCTF, 3-conductor, 0.75 mm² or 1.25 mm² conductor size. The wall plug must be a two-pole grounding type with a Japanese Industrial Standard C8303 (7 A, 125 V ac) configuration.
4.
The flexible cord must be Type RVV, 3-conductor, 0.75 mm² conductor size. Power cord set fittings (appliance coupler and wall plug) must bear the CCC certification mark.
5.
The flexible cord must be Type H05VV-F 3-conductor, 0.75 mm² conductor size. KTL logo and individual approval number must be on each element. Corset approval number and logo must be printed on a flag label.
6.
The flexible cord must be Type HVCTF 3-conductor, 1.25 mm² conductor size. Power cord set fittings (appliance coupler, cable, and wall plug) must bear the BSMI certification mark.
7.
For 127 V ac, the flexible cord must be Type SVT or SJT 3-conductor, 18 AWG, with plug NEMA 5-15P (15 A, 125 V ac), with UL and
CSA or C-UL marks. For 240 V ac, the flexible cord must be Type H05VV-F 3-conductor, 0.75 mm² or 1.00 mm2 conductor size, with plug BS 1363/A with BSI or ASTA marks.
88 Chapter 11 Power cord set requirements
advertisement
Key Features
- Intel® Core™ m3 1 GHz 4 MB
- 8 GB
- 45 W
Related manuals
advertisement
Table of contents
- 7 Product description
- 11 External component identification
- 11 Locating hardware
- 11 Locating software
- 11 Right
- 12 Left
- 14 Front
- 15 Top
- 16 Bottom
- 17 Rear
- 19 Keyboard components (select products only)
- 19 Connecting an optional keyboard
- 20 Removing the keyboard
- 20 TouchPad
- 21 Lights
- 23 Special keys
- 24 Action keys
- 25 Hot keys
- 25 Labels
- 27 Illustrated parts catalog
- 27 Computer major components
- 29 Miscellaneous parts
- 31 Removal and replacement procedures preliminary requirements
- 31 Tools required
- 31 Service considerations
- 31 Plastic parts
- 32 Cables and connectors
- 32 Drive handling
- 33 Grounding guidelines
- 33 Electrostatic discharge damage
- 34 Packaging and transporting guidelines
- 34 Workstation guidelines
- 35 Equipment guidelines
- 36 Removal and replacement procedures for Customer Self-Repair parts
- 36 Component replacement procedures
- 37 Keyboard (select products only)
- 38 Micro SIM card tray
- 39 MicroSD memory card tray
- 40 Rear cover
- 41 Disconnecting the battery
- 42 Kickstand
- 44 SSD
- 46 Removal and replacement procedures for Authorized Service Provider parts
- 46 Component replacement procedures
- 47 WWAN or GPS module
- 49 Rear webcam and flash
- 51 Display panel
- 55 Battery
- 57 Hall effects sensor board
- 59 NFC module
- 61 System board
- 64 POGO connector
- 64 Microphone board
- 65 Front webcam
- 65 Fingerprint reader board
- 67 Smart card reader board and bracket
- 70 Volume button
- 72 Power button
- 74 Speakers
- 76 Antennas
- 77 Middle frame
- 78 Backup and recovery
- 78 Creating recovery media and backups
- 78 Creating HP Recovery media (select products only)
- 79 Using Windows tools
- 80 Restore and recovery
- 80 Recovering using HP Recovery Manager
- 80 What you need to know before you get started
- 81 Using the HP Recovery partition (select products only)
- 81 Using HP Recovery media to recover
- 81 Changing the boot order
- 82 Removing the HP Recovery partition (select products only)
- 83 Computer Setup (BIOS), TPM, and HP Sure Start
- 83 Using Computer Setup
- 83 Starting Computer Setup
- 83 Using a USB keyboard or USB mouse to start Computer Setup (BIOS)
- 84 Navigating and selecting in Computer Setup
- 84 Restoring factory settings in Computer Setup
- 85 Updating the BIOS
- 85 Determining the BIOS version
- 85 Downloading a BIOS update
- 86 Changing the boot order using the f9 prompt
- 86 TPM BIOS settings (select products only)
- 87 Using HP Sure Start (select products only)
- 88 Using HP PC Hardware Diagnostics (UEFI)
- 88 Downloading HP PC Hardware Diagnostics (UEFI) to a USB device
- 90 Specifications
- 90 Computer specifications
- 91 Display specifications
- 92 Power cord set requirements
- 92 Requirements for all countries
- 93 Requirements for specific countries and regions
- 95 Statement of memory volatility
- 97 Nonvolatile memory usage
- 99 Questions and answers
- 100 Using HP Sure Start (select models only)
- 102 Recycling
- 103 Index