advertisement
Audio adjustments
64
Audio adjustments
Displaying the “Audio” setting screen
1 Press the button.
2 Touch , and then .
Using fader/balance adjustment
1 Display the “Audio” setting screen.
Refer to Displaying the “Audio” setting screen on page 64
2 Touch [Fader/Balance].
p Only the balance can be adjusted when “On” is selected in
“Rear Speaker”. Touch [Balance] and skip to step 4.
Refer to Setting the rear speaker output on page 64.
3 Touch or to adjust the front/rear speaker balance.
p Set “Front” and “Rear” to “0” when using a dual speaker system.
4 Touch or to adjust the left/right speaker balance.
You can also set the value by dragging the point on the displayed table.
Switching sound muting/ attenuation
You can automatically mute or attenuate the AV source volume and the iPhone or smartphone application volume when the navigation outputs the guidance voice.
The default setting is “ATT”.
1 Display the “Audio” setting screen.
Refer to Displaying the “Audio” setting screen on page 64
2 Touch [Mute Level].
3 Touch the item.
ATT:
The volume becomes 20 dB lower than the current volume.
Mute:
The volume becomes 0.
Off:
The volume does not change.
Adjusting source levels
SLA (source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources.
p Settings are based on the FM tuner volume level, which remains unchanged.
p This function is not available when the FM tuner is selected as the AV source.
1 Compare the FM tuner volume level with the level of the source.
2 Display the “Audio” setting screen.
Refer to Displaying the “Audio” setting screen on page 64
3 Touch [Source Level Adjuster].
4 Touch or to adjust the source volume.
p If you directly touch the area where the cursor can be moved, the SLA setting will be changed to the value of the touched point.
p “+4” to “–4” is displayed as the source volume is increased or decreased.
p The default setting is “0”.
Setting the rear speaker output
A rear speaker output of this product can be turned on or off.
The default setting is “On”.
1 Display the “Audio” setting screen.
Refer to Displaying the “Audio” setting screen on page 64
2 Touch [Rear Speaker] to switch “On” or “Off”.
p If “Off” is selected, the rear speaker adjustment is not available in “Speaker Level”, “Time Alignment” and
“Crossover”.
Setting the subwoofer output
This product is equipped with a subwoofer output mechanism, which can be turned on or off.
The default setting is “On”.
1 Display the “Audio” setting screen.
Refer to Displaying the “Audio” setting screen on page 64
2 Touch [Subwoofer] to switch “On” or “Off”.
p If “Off” is selected, the rear speaker adjustment is not available in “Speaker Level”, “Time Alignment” and
“Crossover”.
Adjusting the cutoff frequency value
You can adjust the cutoff frequency value of each speaker.
The following speakers can be adjusted:
Front, Rear, Subwoofer p “Rear” is available only when “Rear Speaker” is set to “On”.
Refer to Setting the rear speaker output on page 64
p “Subwoofer” is available only when “Subwoofer” is set to
“On”.
Refer to Setting the subwoofer output on page 64
1 Display the “Audio” setting screen.
Refer to Displaying the “Audio” setting screen on page 64
2 Touch [Crossover] or [Subwoofer Settings].
3 Touch [<] or [>] to switch the speaker.
4 Drag the graph line to set the cutoff position.
5 Drag the lowest point of the graph to set the cutoff slope.
p The following items can also be set.
⁂⁚⁓⁗
:
Switches the subwoofer phase between normal and reverse position.
LPF/HPF:
Switches the LPF/HPF setting to “On” or “Off”.
When it is turned off, the high-pass filter or low-pass filter of each speaker can also be turned on by touching the graph lines.
Selecting the listening position
You can select a listening position that you want to make as the center of sound effects.
The default setting is “Off”.
1 Display the “Audio” setting screen.
Refer to Displaying the “Audio” setting screen on page 64
2 Touch [Listening Position].
3 Touch the desired position to change the listening position.
The following items are available:
Off, Front-L, Front-R, Front, All.
< CRB5005-A >
advertisement