4
4.1
4.1.1
4.1.2
MHM-97402, Rev 24
Additional installations
Additional installations
Topics covered in this chapter:
•
•
•
•
•
Install Machine History Viewer
Machine History Viewer works in conjunction with AMS Machinery Manager and other AMS
Suite software programs to allow you to view and analyze the operating history of a facility’s rotating machinery. Machine History Viewer is a browser-based application that can be accessed from any network computer.
Install Internet Information Services (IIS)
Install Internet Information Services (IIS) with the following features:
• IIS Management Console
• IIS Application Development Features (World-wide Web Services)
.NET Extensibility
ASP
ASP.NET
ISAPI Extensions
ISAPI Filters
Server-side Includes
Tip
On Windows 7, open Control Panel, select Turn Windows Features On or Off and select the features from
Internet Information Services and World Wide Web Services.
Install Machine History Viewer on the Network Server
Machine History Viewer installation includes the following components:
• Machine History Viewer Web Service
• Machine History Viewer Client User Interface
• Microsoft SQL Server 2014 Express
29
Additional installations
Machine History Viewer can be installed in three configurations:
1.
Compact configuration: Install Machine History Viewer on the same server-class computer as AMS Machinery Manager Network Server and Microsoft SQL Server
2014 Express for a compact configuration.
2.
Recommended configuration: Install Network Server on one server-class machine and install Machine History Viewer and Microsoft SQL Server 2014 Express on a separate server-class computer.
3.
Distributed configuration: Install each required component of Machine History
Viewer on separate server-class computers.
The instructions describe how to install either the compact configuration and recommended configuration.
Prerequisites
• Install the AMS Machinery Manager Network Server on the server first.
• The Machine History Viewer version must match Network Server.
• Install IIS 5.2 or newer first. (Install IIS before the .NET Framework, available during installation).
Note
•
•
Microsoft SQL Server 2014 Express is required by and installed with Machine History Viewer.
Microsoft .NET Framework 4.0 is required by and installed with Machine History Viewer Web
Service, Microsoft SQL Server 2014 Express, and the Machine History Viewer Client User
Interface.
Procedure
1.
Insert the AMS Machinery Manager Software Installation DVD and open it in
Windows Explorer.
2.
Browse to the Install\MachineHistoryViewer folder.
3.
Double-click setup.exe and continue through the installation.
Important
On Windows 7, right click setup.exe and select Run as administrator.
4.
Accept the license agreement.
5.
The Configuration window displays. Choose the components to install on this computer and click Next.
• For the compact configuration and the recommended configuration, check both
Web Service and Client UI.
• For the distributed configuration, launch the installation on each computer; choose only the Web Service feature on one computer, and only the Client UI feature on the other computer.
6.
Click Yes if prompted to install the Microsoft .NET Framework.
30 MHM-97402, Rev 24
Additional installations
It may take several minutes to complete the installation. This step applies if
Microsoft .NET Framework is not already installed.
A dialog may display the process of the Microsoft Report Viewer redistributable files installation.
7.
In the Select Computer for SQL Server 2014 Express dialog, choose where to install the SQL server and click Next.
• For a compact configuration and the recommended configuration, select This computer (maximizes performance) .
• For the distributed configuration, select A separate computer (may degrade performance) . A dialog displays additional instructions for this setup.
Note
If Microsoft SQL Server 2014 Express is already installed, this installation process creates new instance named “EmersonCSIMM”. If you run the installer again, the Microsoft SQL Server
2014 Express does not need to install additional instances.
8.
When prompted, type a password to be used as part of the SQL connection string and click Next. The SQL server installs automatically.
A summary of the SQL configuration displays. Make a note of this information for future reference.
Computer Name:
SQL Server Instance Name:
Strong Password:
EmersonCSIMM
9.
(Distributed configuration only.) If you chose to install the SQL server on a separate computer, the Database Server Login dialog appears. Provide the information to connect to the SQL server on the separate computer.
10.
Review the Disk Space Requirements for Local and Mapped Drives dialog to determine where you want to install the selected Machine History Viewer components. Click OK.
11.
In the Choose Destination Location dialog, click Next to accept the default location
(recommended), or click Browse and select a different location for the selected
Machine History Viewer components.
12.
When prompted, enter the network name of the computer where the Network
Server is installed.
You must specify the computer name if the installation is not on the same computer as the Network Server.
13.
(Distributed configuration only.) When prompted, enter the network name of the computer hosting the Machine History Viewer Web Service.
MHM-97402, Rev 24 31
Additional installations
4.1.3
Note
You must specify the computer name where the Machine History Viewer Web Service is installed, if you are installing only the Machine History Viewer Client User Interface.
14.
On the Start Copying Files screen, click Next to install the software components listed.
The Setup Status screen displays a progress bar.
15.
When the URL displays, make a note of the address so you can access Machine
History Viewer.
Example: http://Servername/MachineHistory where Servername is the name of the computer where Machine History Viewer is installed.
Machine History Viewer URL:
Note
If you are unable to log in, follow the instructions in Internet Explorer Help to enable cookies for this URL.
16.
Click Finish to complete the installation.
Launch Machine History Viewer
Prerequisites
• Verify the client computer meets the operating requirements for a workstation.
• Use Internet Explorer 7.0 or newer with cookies enabled for the URL displayed during installation.
• In RBM Network Administration, create an AMS Machinery Manager username and password to use with Machine History Viewer.
• In RBM Network Administration, add a database to the user's database list, or allow the user to access the master database list. If the user does not have a database, no data will be visible to this user through Machine History Viewer.
Procedure
1.
Launch Internet Explorer and enter the URL address you recorded during installation.
2.
Log in with a user name and password.
More information about using Machine History Viewer is provided in Online Help available after you log in.
32 MHM-97402, Rev 24
4.2
4.3
MHM-97402, Rev 24
Additional installations
Install AMS Standalone Data Transfer
AMS Standalone Data Transfer allows you to transfer route files between an analyzer and a folder on the computer or network. You do not need direct access to an AMS Machinery
Manager client or database. When you receive a route definition file, load it to your analyzer with AMS Standalone Data Transfer. After you collect data, dump the route using
AMS Standalone Data Transfer and return the route data file.
Note
Only install AMS Standalone Data Transfer on a computer where AMS Machinery Manager is NOT installed.
Procedure
1.
Insert the AMS Machinery Manager Software Installation DVD and open it in
Windows Explorer.
2.
Browse to Install/StandaloneDataTransfer.
3.
Double-click setup.exe and continue through the installation.
Important
On Windows 7, right click setup.exe and select Run as administrator.
4.
Accept the license agreement.
5.
Follow instructions presented by the installation program.
Windows Device Driver Installation Wizard prompts you to install the CSI USB
Drivers.
6.
Install the CSI USB Drivers.
7.
Follow instructions presented by the installation program.
8.
At the Windows Security prompt, click Install to install the drivers.
9.
Click Finish.
The CSI USB Drivers installation wizard closes.
10.
Click Finish.
Install AMS Machinery Manager ODBC Driver
You can install the AMS Machinery Manager ODBC driver in order to access your information from third party software such as Microsoft Access ™ , Crystal Reports ™ , or
ORACLE ® .
Note
This installation is optional and not required by AMS Machinery Manager.
33
Additional installations
4.4
4.4.1
Procedure
1.
Go to the computer where you want the driver installed.
You can install the driver on any computer where the AMS Machinery Manager
Client is installed.
2.
Insert the AMS Machinery Manager Software Installation DVD and open it in
Windows Explorer.
3.
Browse to the Install\csiODBC folder.
4.
Double-click setup.exe and continue through the installation.
Important
On Windows 7, right click setup.exe and select Run as administrator.
5.
Accept the license agreement.
6.
When the Choose Destination Location screen appears, use the default location, and click Next.
7.
In the Ready to Install Program screen, click Next to begin the installation.
The Setup Status screen displays the status of the installation.
8.
When the Installation Complete screen appears, click Finish.
If the screen displays a message to restart the computer, you must restart the computer before attempting to use the software.
Install AMS Machinery Manager CSI Data
Provider
The AMS Machinery Manager CSI Data Provider works with AMS Machinery Manager
Network Server to supply information to applications such as AMS Asset Portal and AMS
Suite: Asset Performance Management. AMS Machinery Manager sends Assets, Active
Alerts and Event History. The Alert details are generated from alarms that are set in the databases, such as the Vibration alarms for Export. Event details are generated from
RBMview when a new problem is created.
Verify you have a version of AMS Machinery Manager that supports your application:
•
•
AMS Machinery Manager version 4.81 or later is required to support AMS Asset
Portal 1.0 or newer.
AMS Machinery Manager 5.5 or later is required to support AMS Suite: Asset
Performance Management.
Install Internet Information Services (IIS)
Install Internet Information Services (IIS) with the following features:
34 MHM-97402, Rev 24
Additional installations
4.4.2
MHM-97402, Rev 24
• IIS Management Console
• IIS Application Development Features (World-wide Web Services)
.NET Extensibility
ASP
ASP.NET
ISAPI Extensions
ISAPI Filters
Server-side Includes
Tip
On Windows 7, open Control Panel, select Turn Windows Features On or Off and select the features from
Internet Information Services and World Wide Web Services.
Install CSI Data Provider
Install the CSI Data Provider on the same computer as the AMS Machinery Manager
Network Server or on a different computer with network access to the Network Server.
Prerequisites
An AMS Machinery Manager Client must be installed on the Network Server computer.
The CSI Data Provider version must match the Network Server.
CSI Data Provider requires the Microsoft .NET Framework 4.0, available during the installation. IIS must be installed before Microsoft .NET Framework 4.0.
Procedure
1.
Go to the computer where the AMS Machinery Manager Network Server is installed, or a computer with network access to the Network Server.
2.
Insert the AMS Machinery Manager Software Installation DVD and open it in
Windows Explorer.
3.
Browse to Install\CSIDataProvider.
4.
Double-click setup.exe and continue through the installation.
Important
On Windows 7, right click setup.exe and select Run as administrator.
5.
Accept the license agreement and click Next.
6.
Continue through the installation steps and follow prompts.
The installation program checks the minimum system requirements for the software. If the computer is missing any required software, you will be prompted to install the necessary software.
7.
On the Disk Space Requirements screen, review this information and click OK.
35
Additional installations
8.
On the Choose Destination Location page, use the default location and click Next.
9.
When prompted, enter the name of the computer running Network Server and click
Next .
The Data Provider must be able to locate the Network Server to function properly.
10.
When prompted, install and start the CsiRVWmgr service on the Network Server.
Complete the following steps on the Network Server.
a. On the Network Server, launch the Windows Command Prompt as
Administrator.
Tip
On Windows 7, click Start > Accessories > Command Prompt, right-click Command Prompt and select Run as Administrator.
b. In the Command Prompt window, type C:\RBMnet\RBMsuite\sys\RVWmgr.exe -i and press Enter.
Example:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32> C:\RBMnet\RBMsuite\sys\RVwMgr.exe -i
C:\Windows\system32>
The CsiRVWmgr service is installed as a Windows Service.
c. On the Network Server, launch Windows Services.
d. Right-click the service named CsiRVWmgr and select Properties.
e. In the Properties dialog, choose Automatic from the Startup type menu.
This setting ensures the service restarts automatically if it is ever stopped, such as after a reboot.
f. Click Start to start the CsiRVWmgr service.
The CsiRVWmgr service is installed and started.
11.
Click OK to continue the installation.
12.
When the URL displays, make a note of the address.
Example: http://Servername/CSIDataProvider/CSIDataProvider.asmx, where Servername is the name of the computer where CSI Data Provider is installed.
You will need to use the URL to access the CSIDataProvider web service and register the AMS Machinery Manager user.
36 MHM-97402, Rev 24
4.4.3
4.4.4
Additional installations
Table 4-1: CSI Data Provider URL
CSI Data Provider URL:
13.
Click Finish.
Create a user for CSI Data Provider
See Create a new user in AMS Machinery Manager Help for details.
Procedure
1.
In RBM Network Administration, create a new user with guest access mode.
Important
Only use this username and password with CSI Data Provider. If these credentials are used by some other user or application, the CSI Data Provider cannot access the system.
2.
In RBM Network Administration, right-click the new user and select Edit User.
3.
Click User Database List.
The Database List dialog appears.
4.
To add a database, select the database from the System Databases pane and click
Add .
5.
Click OK.
Register the user for CSI Data Provider
1.
Launch Internet Explorer and type the web address displayed during installation.
Example: http://Servername/CSIDataProvider/CSIDataProvider.asmx, where Servername is the name of the computer where CSI Data Provider is installed.
The CSI Data Provider web interface appears.
MHM-97402, Rev 24 37
Additional installations
38
2.
Click the GetPlantHierarchy link.
3.
On the GetPlantHiearchy page, enter the AMS Machinery Manager user name and password in the format: username|password
For example, if “AOXS” is the user name and “aoxspwd1” is the password, enter:
AOXS|aoxspwd1 .
4.
Click Invoke.
A window displays a stream of XML statements. This is proof that you successfully registered the user and CSI Data Provider is functioning properly.
MHM-97402, Rev 24
Additional installations
4.4.5
4.4.6
Note
If you get an error message, ensure that the CsiRVWmgr service is started and the user name has been created with the password you entered.
Create a data source
Use the AMS Suite: Asset Performance Management (or Asset Portal Manager for use with
AMS Asset Portal) to create a data source. Refer to the respective product documentation for more information.
Configure Web Server settings
In order for the CSI Data Provider to work correctly, the World Wide Web Publishing service must be configured correctly.
Procedure
1.
Open Windows Services and start the service named World Wide Web Publishing
Service.
When you install the World Wide Web Publishing Service with Windows Server, it may not be started by default. You must start the service in order to run a web service.
2.
Enable ASP.NET to execute.
By default, the Web Service Extension status for ASP.NET is Prohibited. In IIS Manager, change the status to Allowed.
MHM-97402, Rev 24 39
Additional installations
4.5
Follow instructions for your version of IIS to enable ASP.NET. For example, follow these instructions in IIS 7.0.
a. Launch IIS Manager.
b. Select the computer name node in the Connections pane.
c. In the Features view, select ISAPI and CGI Restrictions.
d. Select the ASP.NET service and change the status to Allowed.
3.
Add CSIDataProvider to the Trusted Sites.
The first time the CSIDataProvider service runs, a security warning may appear. Add this website to the computer’s trusted sites.
From this point, the CSIDataProvider will be granted access to this site.
Install CSI USB drivers
The USB drivers for the CSI 2140 analyzer are installed automatically with AMS Machinery
Manager or AMS Standalone Data Transfer. You can install the USB drivers on any computer where you need to connect a CSI 2140 analyzer.
Procedure
1.
Insert the AMS Machinery Manager Software Installation DVD and open it in
Windows Explorer.
2.
Browse to Install\CSI USB Drivers.
3.
Double-click setup.exe and continue through the installation.
Important
On Windows 7, right click setup.exe and select Run as administrator.
4.
Accept the license agreement.
5.
Follow instructions presented by the installation program.
6.
At the Windows Security prompt, click Install to install the drivers.
7.
Click Finish.
40 MHM-97402, Rev 24
