Anatomical seat. Vermeiren Eclips XXL

Eclips XXL

2013-04

3.3 Anatomical seat

L WARNING: Risk of injury – Check that the seat is firmly secured before use.

L

Check that the screws are not damaged.

WARNING: Risk of injury – Avoid getting your fingers caught during the assembly process (between seat and cross-hinge).

Your wheelchair has an anatomical padded seat, place it on the tubular cross-hinge so that the seat's supports engage equally with the cross-hinge. In the wooden base you will find slots that are placed in the hinge's crosspieces. To fold up the wheelchair, remove the seat by pulling it upwards.

3.4 Anatomical back

L WARNING: Risk of injury – Check that the backrest is firmly mounted into the four brackets before using your wheelchair.

L WARNING: Risk of injury – Avoid getting your fingers, clothes caught during the assembly process.

The backrest of the wheelchair can be mounted by following instructions.

1. Mount the backrest into the four brackets

.

2. Turn on the upper star buttons to lock the star buttons by hand.

3. Check that the backrest is firmly fixated.

To remove the backrest of the wheelchair:

1. Loosen the upper star buttons

➁

.

2. Pull the backrest upwards out the four brackets .

3.5 Adjust the brakes

L WARNING: Risk of injury – Brakes may only be adjusted by your specialist dealer.

Adjust the brakes according following rules:

1. Disconnect the brakes by pulling lever backwards.

Page 14