advertisement
24 www.aeg.com
11
Clean Air Control
3.
CONTROL PANEL
7
6
5
1
5 sec
2
3
4
1
Display
2
Temperature warmer button
3
ON/OFF button
OK button
Temperature warmer button
4
5
Temperature colder button
6
Mode button
7
Temperature colder button
It is possible to change predefined sound of buttons to a loudly one by pressing together MODE
6
for some seconds. Change is reversible.
7
and MINUS
3.1
Display
G
F
E
D
• A. Holiday function
• B. Extra humidity function
• C. Fridge temperature indicator
• D. Alarm indicator
• E. Drinks Chill function
• F. COOLMATIC function
• G. Child Lock function
C
A
B
3.2
Switching on
To switch on the appliance do these steps:
1.
2.
3.
Connect the mains plug to the power socket.
Press the ON/OFF button if the display is off.
If "dEMo" appears on the display, the appliance is in demonstration mode. Refer to "What to do if..." paragraph.
4.
The temperature indicators show the set default temperature.
To select a different set temperature refer to "Temperature regulation".
3.3
Switching off
To switch off the appliance do these steps:
1.
2.
3.
Press the ON/OFF button for 5 seconds.
The display switches off.
To disconnect the appliance from the power disconnect the mains plug from the power socket.
3.4
Temperature regulation
The set temperature of the fridge may be adjusted by pressing the temperature button.
Set default temperature: +5°C for the fridge.
The temperature indicator shows the set temperature.
The set temperature will be reached within 24 hours.
After a power failure the set temperature remains stored.
3.5
Child Lock function
To lock the buttons from unintentional operation select the Child Lock function.
To switch on the function:
1.
2.
Press the Mode button until the corresponding icon appears.
The Child Lock indicator flashes.
3.
Press the OK button to confirm.
The Child Lock indicator is shown.
To switch off the function:
1.
2.
3.
Press the Mode button until the
Child Lock indicator flashes.
Press the OK button to confirm.
The Child Lock indicator goes off.
3.6
COOLMATIC function
If you need to insert a large amount of warm food, for example after doing the grocery shopping, we suggest activating the COOLMATIC function to chill the products more rapidly and to avoid warming the other food which is already in the refrigerator.
To switch on the function:
1.
Press the Mode button until the corresponding icon appears.
2.
The COOLMATIC indicator flashes.
Press the OK button to confirm.
The COOLMATIC indicator is shown.
The COOLMATIC function shuts off automatically after approximately 6 hours.
To switch off the function before its automatic end:
1.
Press the Mode button until the
COOLMATIC indicator flashes.
2.
3.
Press the OK button to confirm.
The COOLMATIC indicator goes off.
The function switches off by selecting a different fridge set temperature.
3.7
Extra Humidity function
If you need to increase the humidity in the refrigerator, we suggest activating the Extra Humidity function.
To switch on the function:
1.
Press the Mode button until the corresponding icon appears.
The Extra Humidity indicator flashes.
ENGLISH
25
2.
Press the OK button to confirm.
The Extra Humidity indicator is shown.
To switch off the function:
1.
2.
Press the Mode button until the Extra Humidity indicator flashes.
Press the OK button to confirm.
3.
The Extra Humidity indicator goes off.
3.8
Holiday function
This function allows you to keep the refrigerator closed and empty during a long holiday period without the formation of a bad smell.
The fridge compartment must be empty with holiday function on.
To switch on the function:
1.
Press the Mode button until the corresponding icon appears.
2.
The Holiday indicator flashes.
The fridge temperature indicator shows the set temperature.
Press the OK button to confirm.
The Holiday indicator is shown.
To switch off the function:
1.
Press the Mode button until the Holiday indicator flashes.
2.
3.
Press the OK button to confirm.
The Holiday indicator goes off.
The function switches off by selecting a different fridge set temperature.
3.9
Door open alarm
An acoustic alarm will sound if the door is left open for a few minutes. The door open alarm conditions are indicated by:
• flashing Alarm indicator
• acoustic buzzer
When normal conditions are restored
(door closed), the alarm will stop.
During the alarm, the buzzer can be switched off by pressing any button.
advertisement
Related manuals
advertisement
Table of contents
- 3 VEILIGHEIDSVOORSCHRIFTEN
- 6 BESCHRIJVING VAN HET PRODUCT
- 6 BEDIENINGSPANEEL
- 9 DAGELIJKS GEBRUIK
- 10 NUTTIGE AANWIJZINGEN EN TIPS
- 11 ONDERHOUD EN REINIGING
- 12 PROBLEEMOPLOSSING
- 15 MONTAGE
- 17 GELUIDEN
- 18 TECHNISCHE GEGEVENS
- 21 SAFETY INSTRUCTIONS
- 23 PRODUCT DESCRIPTION
- 24 CONTROL PANEL
- 26 DAILY USE
- 27 HELPFUL HINTS AND TIPS
- 28 CARE AND CLEANING
- 29 TROUBLESHOOTING
- 31 INSTALLATION
- 34 NOISES
- 35 TECHNICAL DATA
- 38 SICHERHEITSHINWEISE
- 41 GERÄTEBESCHREIBUNG
- 41 BEDIENFELD
- 44 TÄGLICHER GEBRAUCH
- 45 PRAKTISCHE TIPPS UND HINWEISE
- 46 REINIGUNG UND PFLEGE
- 47 FEHLERSUCHE
- 50 MONTAGE
- 53 GERÄUSCHE
- 54 TECHNISCHE DATEN