Method 1. Connecting with a Cable. Samsung HW-N650

04 CONNECTING TO YOUR TV

Hear TV sound from your Soundbar through wired or wireless connections.

• When the Soundbar is connected to selected Samsung TVs, the Soundbar can be controlled using the TV’s remote control.

– This feature is supported by 2017 and later Samsung Smart TVs that support Bluetooth when you connect the Soundbar to the TV using an optical cable.

– This function also allows you to use the TV menu to adjust the sound field and various settings as well as the volume and mute.

Method 1. Connecting with a Cable

When the audio in a broadcast is encoded in Dolby Digital and the “Digital Output Audio Format” on your TV is set to PCM, we recommend that you change the setting to Dolby Digital. When the setting on the TV is changed, you will experience better sound quality. (The TV menu may differ depending on the

TV manufacturer.)

Connecting a TV using an HDMI Cable

Connect to the HDMI IN

(ARC) port of your TV.

Bottom of the Soundbar

HDMI IN

HDMI IN

(ARC)

HDMI Cable

Connect to the HDMI OUT (TV-ARC) port of the Soundbar main unit.

DC 24V

TV ARC Right Side of the Soundbar

1. With the Soundbar and TV turned on, connect the HDMI cable as shown in the figure.

ENG - 9

2. “ TV ARC ” appears in the display window of the Soundbar main unit and the Soundbar plays TV sound.

• If TV sound is inaudible, press the (Source) button on the remote control or on the right side of the Soundbar to switch to “ D.IN

” mode. The screen displays “ D.IN

” and “ TV ARC ” in sequence, and TV sound is played.

• If “ TV ARC ” does not appear in the display window of the Soundbar main unit, confirm that the

HDMI cable is connected to the correct port.

• Use the volume buttons on the TV’s remote control to change the volume on the Soundbar.

Connecting using an Optical Cable

Bottom of the Soundbar

AUX IN

DIGITAL AUDIO IN (OPTICAL)

OPTICAL OUT

Optical Cable

(not supplied)

D.IN

Right Side of the Soundbar

1. Connect the DIGITAL AUDIO IN (OPTICAL) jack on the Soundbar to the OPTICAL OUT jack of the TV with a digital optical cable (not supplied).

2. Press the (Source) button on the right side panel or remote control, and then select the “ D.IN

” mode.

Auto Power Link

Auto Power Link automatically turns on the Soundbar when the TV is turned on.

1. Connect the Soundbar and a TV with a digital optical cable (not supplied).

2. Press the Left button on the remote control (the blue spot in the illustration to the right) for 5 seconds to turn Auto Power Link on or off.

• Auto Power Link is set to ON by default.

(To turn off this function, hold the Left button on the remote for 5 seconds.)

• Depending on the connected device, Auto Power Link may not function.

• This function is only available in the “ D.IN

” mode.

ENG - 10