Quick Start Guide. Canon 2249C002

6

Quick Start Guide

1

Insert the battery

(p.38)

.

Upon purchase, charge the battery

to start using (p.36).

2

Insert the card

(p.38)

.

With the card’s label facing toward the back of the camera, insert it into the card slot.

3 White index Red index

Attach the lens

(p.48)

.

Align the lens’s white or red mount index with the camera’s mount index of the same color to attach the lens.

4

Set the lens’s focus mode switch to <

f

>

(p.48)

.

5

Set the power switch to <

1

>, then set the Mode Dial to <

A

>

(Scene Intelligent Auto)

(p.72)

.

All the necessary camera settings will be set automatically.

6

7

8

Quick Start Guide

Flip out the LCD monitor

(p.41)

.

When the LCD monitor displays the date/time/zone setting screen, see

page 44.

Focus on the subject

(p.51)

.

Look through the viewfinder and aim the viewfinder center over the subject.

Press the shutter button halfway, and the camera will focus on the subject.

The built-in flash will be raised as necessary.

Take the picture

(p.51)

.

Press the shutter button completely to take the picture.

9

Review the picture.

The image just captured will be displayed for approx. 2 sec. on the

LCD monitor.

To display the image again, press the < x

> button (p.110).

To shoot while looking at the LCD monitor, see “Live View

Shooting” (p.195).

To view the images captured so far, see “Image Playback” (p.110).

To delete images, see “Erasing Images” (p.339).

7