Error Codes. Canon 2249C002

Error Codes

Error number If there is a problem with the camera, an error message will appear. Follow the onscreen instructions.

Cause and countermeasures

Number

Error Message and Solution

Communications between the camera and lens is faulty. Clean the lens contacts.

Î Clean the electrical contacts on the camera and lens, use a Canon

Card cannot be accessed. Reinsert/change card or format card with the camera.

Î Remove and insert the card again, replace the card, or format the

Cannot save images because card is full. Replace card.

Î Replace the card, erase unnecessary images, or format the card

The built-in flash could not be raised. Turn the camera off and on again.

Sensor cleaning could not be performed. Turn the camera off and on again.

10, 20

30, 40

50, 60

70, 80

An error prevented shooting. Turn the camera off and on again or re-install the battery.

Î Operate the power switch, remove and install the battery again, or

* If the error message still appears after following the above instructions, write down the error code number and contact your nearest Canon Service

Center .

427

Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

SLR Camera Kit 24.2 MP CMOS Touchscreen Black
Image stabilizer
ISO sensitivity (min): 100 ISO sensitivity (max): 25600 Fastest camera shutter speed: 1/4000 s Slowest camera shutter speed: 30 s ± 5EV (1/2EV; 1/3EV step)
Video recording 1920 x 1080 pixels Full HD
Built-in microphone PictBridge Bluetooth Wi-Fi Near Field Communication (NFC)
Lithium-Ion (Li-Ion)