Light Replacement. LG Electronics LFX21976ST

16

LIGHT REPLACEMENT

To Change Refrigerator Light

This model has special LED interior lighting and service should be performed by a qualified technician.

w WARNING

Electrical Shock Hazard

Before replacing a burned-out light bulb, either unplug the refrigerator or turn off power at the circuit breaker or fuse box.

NOTE: Moving the control to the OFF position does not remove power to the light circuit.

NOTE:

• Not all appliance bulbs will fit your refrigerator.

Be sure to replace the bulb with one of the same size, shape and wattage.

• The light bulbs will turn off if door is left open for seven continuous minutes. Shutting door for one second will light bulbs to come back on.

To Change Freezer Light

1. Unplug refrigerator power cord form outlet.

2. Use a screwdriver to remove the cover screw.

(Save the cover screw)

3. Using a flat instrument, gently pry the lamp cover loose in the front as shown. Rotate downward to remove the rear tabs.

4. Make sure the bulb is cool to the touch.

Turn the bulb counterclockwise to remove.

5. Replace with a new

60-watt appliance bulb.

6. Insert tabs on back of cover into slots in freezer ceiling. Push cover up to snap front into place.

7. Use a screwdriver to assemble the cover screw.

w CAUTION

• DO NOT place fingers inside of cover.

Lamp may be hot.