Setting the Functions. LG Electronics LFX21976ST

SETTING THE FUNCTIONS

Press the button for the desired function to view and select other settings.

SETTING THE DISPENSER LOCK

Press and hold the

ALARM/LOCK button for three seconds to lock the dispenser and all of the other control panel functions.

Press and hold again for

3 seconds to unlock.

SETTING THE DOOR ALARM

The ALARM/LOCK button also controls the door alarm that sounds three times in

30-second intervals when a compartment door is left open for more than 60 seconds. The alarm stops sounding when the door is closed.

Press the ALARM/LOCK button once to activate and deactivate the door alarm function.

NOTE: Contact your local service center if the alarm continues to sound after the doors are closed.

RESETTING THE FILTER INDICATOR

Press and hold the

LIGHT/FILTER button for more than 3 seconds to reset the filter indicator after the water filter has been replaced.

NOTE: It is recommended that the filter be replaced when the indicator light on the front dispenser reaches 0.

If the water or ice cube taste starts to deteriorates.

ACTIVATING ICE PLUS

Press the ICE PLUS/ENERGY

SAVING button once to activate the ICE PLUS function. The ICE

PLUS icon on the display panel will illuminate when activated.

The ICE PLUS function runs the freezer compartment at the coldest setting for a 24-hour period to increase icemaking by up to about 20%, and then turns off automatically.

NOTE: Press the button again to deactivate the ICE PLUS function.

ACTIVATING ENERGY SAVING

Press the ICE PLUS/ENERGY

SAVING button for at least 3 seconds to activate or deactivate the function.

This function is recommended for added energy savings.

(Some heaters to reduce excess moisture on the refrigerator may be turned off)

The energy saving function is also recommended during long periods of time spent away from home-like vacation.

DIAGNOSTIC FAILURE DETECTION

The diagnostic function automatically detects problems with your refrigerator, and a diagnostic code will appear in the display. NOTE: If a diagnostic code appears in the display during use, note the code and then call USA

1-800-243-0000

CANADA

1-888-LGCANADA

(24 hours per day/7 days per week) and select the option to locate an authorized servicer.

25