Checking the oil level. Wacker Neuson 803
Add to My manuals368 Pages
Wacker Neuson 803, with an operating weight of 8.3 metric tons, provides you with more productivity and efficiency for your jobsites. Featuring an advanced hydraulic system, the 803 delivers maximum power to the attachment for optimal performance. Its spacious cab offers excellent visibility and comfort, enhancing your overall operating experience. Whether you're working on landscaping, construction, or demolition projects, the Wacker Neuson 803 is engineered to meet the demands of your toughest jobs.
advertisement
![Checking the oil level. Wacker Neuson 803 | Manualzz Checking the oil level. Wacker Neuson 803 | Manualzz](http://s3.manualzz.com/store/data/053324361_1-b6546c2edc184308a09f33c5f7bfcdc7-360x466.png)
Maintenance
5.4
Engine lubrication system
NOTICE
If the engine oil level is too high or too low, or if an oil change is overdue, this can cause loss of output and engine damage.
• Have the oil changed by an Wacker Neuson service center.
Checking the oil level
MAX
MIN
Fig. 153: Checking the oil level
A
Important
Check the oil level once a day. We recommend checking it before starting the engine. After stopping a warm engine, wait at least 5 minutes before checking.
• Park the machine on level and horizontal ground.
• Stop the engine.
• Raise the lock lever.
• Remove the starting key.
• Let the engine cool down.
• Open the engine cover.
• Clean the area around the oil dipstick with a lint-free cloth.
• Pull out oil dipstick A .
• Clean it with a lint-free cloth.
• Push it back in as far as possible.
• Withdraw it and read off the oil level.
• Close and lock the engine cover.
Important
The oil level must be between the MAX and MIN marks. However if necessary, add oil at the latest when the oil reaches the MIN mark on the oil dipstick A .
5-6
OM803us – Edition 3.1 * *803b510.fm
advertisement
Key Features
- 8.3-ton operating weight for enhanced stability and performance
- Advanced hydraulic system for maximum power and efficiency
- Spacious cab with excellent visibility and comfort
- Versatile attachment compatibility for a wide range of applications
- Easy-to-use controls for smooth and precise operation
- Durable construction for long-lasting performance and reliability
Related manuals
Frequently Answers and Questions
What is the operating weight of the Wacker Neuson 803?
What type of hydraulic system does the 803 have?
Does the 803 have a spacious cab?
advertisement
Table of contents
- 28 Abbreviations/symbols
- 32 Travelling drive
- 32 Operating hydraulics
- 32 Cooling system
- 32 TOPS rollbar (up to serial no. AF01416) (option)
- 32 ROPS rollbar
- 39 Overview of adhesive labels
- 43 Overview of safety labels
- 51 Conditions for use
- 51 User training and knowledge
- 51 Preparing for use
- 51 Information on visibility
- 52 Modifications and spare parts
- 52 User/Owner responsibility
- 52 Repair person qualifications
- 52 Preparing for use
- 53 Starting and stopping
- 53 Work area awareness
- 53 Danger area awareness
- 53 Operating the machine
- 54 Carrying passengers
- 54 Mechanical integrity
- 54 Traveling
- 55 TOPS rollbar (up to serial no. AF01416)
- 55 ROPS rollbar
- 55 Operation without TOPS rollbar (up to serial no. AF01416)
- 55 Operation without ROPS rollbar
- 56 Shatter protection (Option)
- 56 Work range and restricted visibility
- 57 General information
- 57 General information regarding attachments
- 57 Installation notes
- 58 Safety instructions
- 58 Working with a hammer
- 59 Towing
- 59 Transporting
- 59 General maintenance notes
- 60 Personal safety measures
- 60 Preparing for maintenance and repair work
- 61 Performing maintenance and repairs
- 61 Electrical energy
- 62 Underground electric lines
- 62 Overhead electric lines
- 63 Gas, dust, steam, smoke
- 63 Hydraulics
- 63 Noise
- 63 MSDS
- 63 Tracks
- 64 Battery
- 64 Running the engine
- 64 Fueling the engine
- 70 Safety instructions
- 70 .Putting the machine into operation for the first time
- 70 Running-in period
- 71 Check lists
- 71 Start-up checklist
- 72 Operation checklist
- 72 Parking checklist
- 73 Preheating start switch
- 73 Throttle
- 76 Procedure
- 79 Drive position
- 79 Moving off
- 79 Operating temperature range
- 80 Drive levers
- 86 Changing the width of the stabilizer blade
- 90 Parking the machine on slopes
- 92 Telescopically extended travel gear
- 93 Lowering the rollbar
- 94 Raising the rollbar
- 95 Lowering the rollbar
- 95 Raise the rollbar
- 96 Folding the rollbar back
- 96 Folding the rollbar forward
- 97 Lowering the rollbar
- 98 Raise the rollbar
- 105 Safety instructions
- 107 Safety instructions
- 111 General safety instructions
- 112 Left-hand control lever
- 112 Right-hand control lever
- 113 Boom swivel controls (up to serial no. AI00975)
- 114 Boom swivel controls (from serial no. AI00976)
- 115 Auxiliary hydraulics (up to serial no. AI00975)
- 116 Auxiliary hydraulics (from serial no. AI00976)
- 117 Auxiliary hydraulics (double-action option) (up to serial no. AI00975)
- 119 Auxiliary hydraulics (double-action option) (from serial no. AI00976)
- 120 Lowering the boom with the engine stopped
- 121 Rotating the upper carriage
- 121 Rotating upper carriage brake
- 122 Lock lever (up to serial no. AI00814)
- 122 Lock lever (from serial no. AI00815)
- 123 Releasing pressure
- 124 Specific safety instructions
- 125 Removing a bucket
- 125 Mounting a bucket
- 127 Auxiliary hydraulics connections (stick hose routing option)
- 127 Attachments
- 127 Maintenance of attachments
- 128 Working with the standard bucket
- 128 Prohibited work procedures
- 129 Excavator operating position
- 129 Bucket position when digging
- 130 Excavating trenches
- 130 Loading
- 130 Grading
- 130 Excavating trenches sideways
- 131 Working alongside trenches
- 131 Stabilizer blade at rear
- 132 Further practical hints for digging
- 132 Freeing the machine
- 132 Grading
- 136 Refuelling
- 137 Draining the fuel
- 137 Stationary fuel pumps
- 138 Bleeding the fuel system
- 139 Fuel prefilter with water separator
- 140 Checking the oil level
- 141 Adding engine oil
- 142 Specific safety instructions
- 143 Checking/adding coolant
- 145 Cleaning the radiator
- 147 Replacing air filter elements
- 149 Replacing air filter elements
- 151 Checking V-belt tension
- 152 Retightening the V-belt
- 153 Specific safety instructions
- 154 Checking the hydraulic oil level
- 155 Adding hydraulic oil
- 156 Important notices on the use of biodegradable oil
- 157 Checking hydraulic pressure lines
- 159 Parking the machine
- 159 Offset hydraulic cylinder lubrication points
- 160 Lubricating the ball bearing race of the live ring
- 161 Lubricating points of live ring teeth
- 161 Ball sockets (ISO/SAE changeover option)
- 162 Checking the track tension of the rubber tracks
- 163 Adjusting track tension
- 164 Service and maintenance work at regular intervals
- 164 Instructions concerning specific components
- 165 Alternator
- 165 Battery
- 167 Cleaning
- 167 General instructions for all areas of the machine
- 168 Control stand
- 168 Cleaning the seat belt:
- 168 Exterior of the machine
- 168 Engine compartment
- 169 Screw connections and attachments
- 169 Pivots and hinges
- 170 Putting into operation again
- 172 Oil grades for the diesel engine, depending on temperature
- 172 Additional oil change and filter replacement (hydraulic system)
- 173 Oil grades for the hydraulic system, depending on temperature
- 178 Explanation of symbols on the maintenance label
- 183 Fuses behind the right-hand trim
- 183 Relays behind the right-hand trim
- 188 Safety instructions – lift capacity table