Hazardous Locations. Remote Automation Solutions FB2100 Flow Computer

Emerson FB2100 Flow Computer Instruction Manual

D301783X012

August 2020

Section 2: Installation

2.1

2.2

This section covers the following topics:



Hazardous Locations  



Environmental Specifications  



Required Tools  



Site Considerations  



General Wiring Guidelines  

 Grounding  



Opening/Closing the Enclosure  



Mounting the Enclosure  

 Power Modes  



Connecting Power  

 Installing the Optional 30W Solar Panel  

 Adjusting the Optional Solar Panel  



Connecting Communications Ports  

 Door Contact Terminal  

The flow computer ships from the factory fully assembled, except for the optional solar panel assembly.

Hazardous Locations

The housing for the FB2100 is an explosion-proof case designed to operate in hazardous locations.

For North America the FB2100 has certifications for Class I Division 2 (Groups A, B, C & D) nonincendive, and non-hazardous locations only. Appendix A contains special information for Class I

Division 2 installations.

For other world areas the FB2100 has ATEX and IEC Ex certifications for Ex nA Zone 2 non-sparking installations and non-hazardous locations only. See Appendix B for more information.

All certifications are listed on the data plate located on the top of the device.

Environmental Specifications

This section summarizes the environmental specifications for the device. For full details, refer to the product data sheet FB2100 Flow Computer (D301791X012) .

Installation 11