advertisement
Getting Started
■ Use only the AC adaptor supplied with your computer or an equivalent adaptor that is compatible. Use of any incompatible adaptor could damage your computer. TOSHIBA assumes no liability for any damage caused by use of an incompatible adaptor.
■ The supplied power cord conforms to safety rules and regulations in the region the product is bought and should not be used outside this region. For use in other regions, please buy power cords that conform to safety rules and regulations in the particular region.
■ Do not use a 3-pin to 2-pin conversion plug.
■ When you connect the AC adaptor to the computer, always follow the steps in the exact order as described in the User’s Manual. Connecting the power cable to a live electrical outlet should be the last step otherwise the adaptor DC output plug could hold an electrical change and cause an electrical shock or minor bodily injury when touched.
As a general safety precaution, avoid touching any metal parts.
1. Connect the power cord to the AC adaptor.
Connecting the power cord to the AC adaptor (2-pin plug)
User’s Manual
Connecting the power cord to the AC adaptor (3-pin plug)
The Universal AC Adaptor and power cord bundled with this product may differ depending on the product model. Depending on the model, a 2-pin plug or 3-pin plug set of the above may be bundled.
3-5
advertisement
Related manuals
advertisement
Table of contents
- 55 Equipment checklist
- 55 Features
- 55 Special features
- 55 Utilities
- 55 Options
- 56 Front with the display closed
- 56 Left side
- 56 Right side
- 56 Back side
- 56 Underside
- 56 Front with the display open
- 56 System indicators
- 56 Keyboard indicators
- 56 USB floppy disk drive (optional)
- 56 Optical media drives
- 56 AC adaptor
- 57 Setting up your work space
- 57 Connecting the AC adaptor
- 57 Opening the display
- 57 Turning on the power
- 57 Starting up for the first time
- 57 Turning off the power
- 57 Restarting the computer
- 57 Restoring the preinstalled software
- 100 Using the Touch Pad
- 100 Using the USB floppy disk drive (optional)
- 100 Changing Ultra Slim Bay modules
- 100 Using optical media drives
- 100 Writing CDs on DVD-ROM&CD-R/RW drive
- 100 Writing CD/DVDs on DVD Super Multi drive
- 100 Media care
- 100 Sound System
- 100 Modem
- 100 Wireless communications
- 100 Cleaning the computer
- 100 Moving the computer
- 100 Using the Hard Disk Drive (HDD) Protection
- 100 Heat dispersal
- 101 Typewriter keys
- 101 Function keys: F1 … F
- 101 Soft keys: Fn key combinations
- 101 Hot keys
- 101 Windows special keys
- 101 Keypad overlay
- 101 Generating ASCII characters
- 102 Power conditions
- 102 Power indicators
- 102 Battery types
- 102 Care and use of the battery pack
- 102 Replacing the battery pack
- 102 TOSHIBA Password Utility
- 102 Power-up modes
- 102 Panel power on/off
- 102 System Auto Off
- 103 Accessing HW Setup
- 103 HW Setup window
- 103 Configuring the Execute-Disable Bit Capability and TPM