advertisement
Configuring data storage
17 Configuring data storage
17.1 General information about the storage location
The SISTORE MX NVS application software supports recording on separate hard drives and hard drive partitions.
DANGER
z z z
Ensure that there is sufficient storage space on the target drive.
Do not use external USB hard drives, since this can lead to data loss.
Do not use CD/DVD writers as "substitute" hard drives, since these are not supported by the SISTORE MX NVS software.
Drives enabled for recording
After activating the bank and automated teller operation (cash box mode), the drive
D:\
is reserved for recording cash box image files and is no longer available.
Use of network drives
All network drives for which the user has rights will be shown in the list of drives.
As soon as a network drive is selected, the local drives serve only as replacement drives for if the network drive fails. If the network drive becomes available again after it has been unavailable, recording will take place again on the network drive after the next file change.
Network drives must generally be mapped, i.e. access to a network drive can only occur via a drive letter and not via a shared name. Ensure that the network drive is sufficiently fast and has enough bandwidth.
Drive list in the Recording media group field
130
Siemens Building Technologies
Fire Safety & Security Products 03.2009
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 9 Safety
- 9 Target readers
- 9 Work safety information
- 9 General information
- 9 Handling
- 9 Setup
- 9 Installation
- 10 Storage
- 10 Meaning of the written warning notices
- 10 Meaning of the hazard symbols
- 11 Details for ordering
- 11 Package contents
- 12 Software description
- 12 SISTORE MX NVS
- 13 Display mode
- 14 Playback mode
- 15 Configuration mode
- 16 SISTORE RemoteView
- 16 SISTORE WebView
- 17 Operational setup
- 17 Starting SISTORE MX NVS and logging in
- 18 Opening configuration mode
- 18 Selecting other manuals
- 18 SISTORE MX NVS Server PC
- 19 SISTORE MX NVS – LAN camera – CKA
- 21 RemoteView (client)
- 27 Activating alarm connection from Siemens LAN cameras CCIx
- 27 Matching IP ports
- 28 Configuring a LAN camera
- 31 SISTORE MX NVS – SISTORE RemoteView – multi-server mode
- 31 SISTORE MX NVS – MX Multi Channel Box RCI 0601 and CDM
- 32 SISTORE MX NVS – Miniter interface and Miniter reader
- 33 Connecting SCU pan-and-tilt unit via controller
- 34 Network configuration
- 34 Entering the system name
- 35 Configuring the network connection
- 36 Limiting bandwidth
- 36 Configuring ISDN dial-in
- 37 Accept all incoming calls
- 37 React to certain multiple subscriber numbers
- 38 Activating channel bundling
- 39 Configuring the image server
- 39 Controlling network access
- 39 Adding a connection filter
- 41 Editing connection filters
- 42 Deleting connection filters
- 43 Setting the LAN connection speed
- 44 Setting the maximum live image resolution
- 45 Configuring LAN cameras
- 45 General information on LAN cameras
- 46 Adding a LAN camera
- 47 Deleting LAN cameras
- 48 Configuring image parameters
- 48 Setting brightness, contrast and colour saturation
- 49 Setting image quality and resolution
- 50 Configuring the live image display
- 52 Configuring sound recording
- 52 Configuring sound recording via audio input
- 52 Configuring sound recording via network connection
- 53 Configuring automatic camera positioning
- 55 Releasing camera control
- 56 Configuring access to LAN camera configuration
- 56 Configuring live image access
- 57 Opening proprietary camera configuration dialogs
- 58 Configuring motion detection
- 58 Activating motion detection via SISTORE MX NVS
- 58 Activating motion detection by LAN camera
- 60 Configuring motion detection via SISTORE MX NVS
- 60 Setting the sensitivity of motion detection
- 61 Defining the detection area (mask)
- 63 Configuring the time control of the detection area
- 64 Configuring tamper detection
- 64 Opening the sabotage detection dialog
- 65 Setting the sensitivity of sabotage detection
- 66 Defining the detection area (mask)
- 67 Saving a reference image
- 68 Configuring alarm outputs
- 68 Adding and deleting alarm outputs
- 70 Selecting the switch action
- 71 Event-based or time control of alarm outputs
- 74 Configuring alarm inputs
- 74 Adding and deleting alarm inputs
- 75 Configuring USB alarm inputs
- 75 Trigger edge
- 76 Priority
- 77 Configuring time control
- 78 Testing the configuration of an alarm input
- 79 Configuring network alarm inputs
- 79 Configuring priority
- 79 Configuring time control
- 81 Configuring network commands
- 82 Map configuration
- 82 General information about maps
- 84 Adding a map
- 85 Deleting a map
- 85 Linking a map
- 86 Edit layer
- 86 Import layer
- 87 Export layer
- 88 Edit object
- 88 Insert object
- 89 Changing objects
- 89 Changing the camera icon
- 90 Changing the position of the object
- 90 Deleting an object
- 91 Configuring user and access management
- 91 General information on user management
- 91 User groups
- 92 Global user rights
- 93 Camera-specific user rights
- 94 User account configuration
- 94 Creating and changing user accounts
- 96 Deleting a user account
- 97 User account locking
- 97 Unlocking a user account
- 98 Predefined user accounts: Administrator and Installer
- 99 Configuring the validity period of a password
- 100 Configuring the logbook
- 100 Enabling extended logbook entries
- 101 Compressing logbook entries daily
- 101 Deleting logbook entries automatically
- 102 Sending logbook excerpts automatically
- 102 Enabling software triggering
- 103 Enabling operating panel control
- 104 Configuring multi-monitor mode
- 105 Configuring a monitor as the main monitor
- 106 Configuring a monitor as a display monitor
- 107 Configuring a monitor as an event monitor
- 108 Configuring a monitor as a sequence monitor
- 109 Configuring a monitor as a site plan monitor
- 109 Configuring a monitor as a message dialog monitor
- 110 application software
- 110 Selecting the user interface language
- 111 Configuring the display area
- 111 Selecting the initial arrangement of the display area
- 111 Selecting the initial display mode
- 113 Configuring the recording status display
- 114 Configuring the live image change interval
- 114 Blanking the event view window
- 115 Enabling frame rate display
- 116 Showing motions
- 116 Configuring text overlay for a LAN camera
- 117 Configuring system messages
- 118 Showing the on-screen keyboard
- 118 Enabling automatic logout
- 119 foreground
- 120 Recording configuration
- 120 Enabling automatic recording on start
- 120 Enabling software triggering
- 121 Enabling video encryption
- 122 Configuring recording modes
- 122 General information about recording modes
- 125 Combination example for recording modes
- 126 Transferring recording settings
- 128 Configuring the overwriting of recordings
- 130 Configuring data storage
- 130 General information about the storage location
- 131 Selecting a storage location for recordings
- 132 Selecting a storage location for the database
- 133 Selecting a storage location for backup
- 134 Removing write protection
- 134 Clearing the backup directory
- 134 Choosing the backup schedule
- 135 Selecting the type of recordings for backup
- 136 Configuring alarm response
- 136 Configuring e-mail notification
- 136 Enabling e-mail notification
- 137 Setting notification via the SMTP server
- 138 Configuring the connection to the SMTP server
- 139 Entering e-mail recipient data
- 139 Configuring time control
- 140 Configuring SMS notification
- 140 Enabling SMS notification
- 141 Entering SMS recipient data
- 142 Configuring time control
- 143 Configuring the alarm connection
- 143 Configuring the network alarm connection
- 144 Configuring the ISDN alarm connection
- 145 Configuring time control
- 146 Configuring the FTP server
- 147 Testing alarm response
- 149 Configuring bank mode
- 149 Enabling bank mode
- 150 Configuring the number of recordings
- 151 Configuring forced logout
- 152 Configuration of cash dispenser mode
- 152 Enabling cash dispenser mode
- 153 Configuring cash dispenser monitoring
- 158 Configuring the NCR type
- 161 Configuring the SNI_DREBA type
- 165 Configuring access control
- 165 Adding and removing card readers
- 166 Configuring the door control function
- 167 Configuring a black list
- 170 Configuration of cash box mode
- 170 Adding a cash box
- 171 Deleting a cash box
- 171 Configuring cash box monitoring
- 172 Configuring filters
- 172 Creating a new filter
- 173 Importing filters
- 174 Deleting filters
- 175 Exporting filters
- 176 Displaying cash box data
- 177 Configuration of holidays
- 177 Adding a holiday
- 177 Creating a new holiday
- 178 Importing holidays
- 179 Deleting a holiday
- 180 Exporting holidays
- 181 Configuration management
- 181 Resetting the configuration
- 181 Importing a configuration
- 182 Exporting the configuration
- 182 Duplicating the system
- 183 Printing the configuration
- 184 Showing the configuration and system data overview
- 185 Importing user configurations
- 185 Opening operating system settings
- 186 Testing the Watchdog
- 187 SISTORE RemoteView
- 187 Software description
- 187 Program window
- 189 Status displays
- 190 Overview of functions
- 191 Starting SISTORE RemoteView and logging in
- 191 Opening configuration mode
- 192 Configuring network connections
- 192 Entering the system name
- 193 Configuring the network connection
- 194 Configuring ISDN dial-in
- 195 Selecting the user interface language
- 195 Configuring the display area
- 195 Selecting the initial display mode
- 196 Configuring live image dwell times
- 196 System message configuration
- 197 Enabling automatic logout
- 197 Configuring connections
- 197 Enabling automatic termination of the connection
- 198 Enabling connection logging
- 198 Selecting the download directory
- 199 Connecting to SISTORE MX NVS
- 200 Enabling the control panel
- 200 Selecting the serial interface
- 200 Enabling button delay
- 201 Configuring the address book
- 201 Opening the address book
- 202 Show all
- 203 Adding an entry
- 204 Editing entries
- 204 Deleting entries
- 204 Sorting entries
- 205 Specifying the camera selection
- 206 Searching for SISTORE MX servers
- 207 Configuring the map
- 209 Importing a map
- 209 Exporting a map
- 209 Placing address objects on the map
- 210 Deleting address objects from the map
- 210 Selecting the map view
- 213 Configuring multi-monitor mode
- 214 Configuring a monitor as the main monitor
- 215 Configuring a monitor as a display monitor
- 215 Configuring a monitor as an event monitor
- 216 Configuring a monitor as a site plan monitor
- 216 Configuring a monitor as a message dialog monitor
- 217 Configuring user management
- 218 Predefined user account Administrator
- 218 Creating and changing user accounts
- 219 Deleting user accounts
- 219 Locking user accounts
- 220 Unlocking a user account
- 220 Configuring the validity period of a password
- 221 Enabling control panel control
- 222 Configuring SISTORE MX NVS via SISTORE RemoteView
- 222 Online configuration (option A)
- 224 Offline configuration (option B)
- 224 Defining the detection area (mask)
- 225 Setting image quality
- 225 Changing user data
- 226 Virtual guard
- 226 Starting and terminating the virtual guard
- 227 Configuring the virtual guard
- 229 File transfer
- 230 Disposal
- 231 Appendix
- 231 Configuration of Windows system settings
- 231 Synchronizing the time with an NTP server
- 232 Setting the time zone
- 233 Video formats supported
- 234 Index