Connect. Crestron UC-CX100-T

UC-CX100-T Quick Start

Crestron Flex Advanced Video Conference System Integrator Kit for Microsoft Teams® Rooms

Connect

System Overview

When connections are complete, the system appears as shown below. The laptop connections shown below may vary based on the selected connection method. Refer to

Make Connections

for detailed connection instructions.

3

UC-CX100-T Quick Start

Crestron Flex Advanced Video Conference System Integrator Kit for Microsoft Teams® Rooms

Make Connections

1. Make UC Engine connections as shown in the following illustrations. The UC Presentation Transmitter can communicate with the UC Engine over a direct connection or a network connection. Select one of the connection types as described below.

a. Make a direct connection for simple installation and setup. Only use the direct connect adapter to connect the UC Presentation Transmitter to the UC Engine. Do not use the direct connect adapter to connect the UC Engine to the network.

Direct Connection

4

UC-CX100-T Quick Start

Crestron Flex Advanced Video Conference System Integrator Kit for Microsoft Teams® Rooms b. Make a network connection if the system is to be managed by the XiO Cloud® service. When a network connection is used, disconnect the direct connect adapter from the UC Engine.

Network Connection

5

UC-CX100-T Quick Start

Crestron Flex Advanced Video Conference System Integrator Kit for Microsoft Teams® Rooms

2. Connect the power supply, USB audio (not included), and a camera (not included) to the bottom of the content ingest device (HD-CONV-USB-260).

6

UC-CX100-T Quick Start

Crestron Flex Advanced Video Conference System Integrator Kit for Microsoft Teams® Rooms

3. Connect power and the content ingest device (HD-CONV-USB-260) to the top of the UC Presentation Transmitter. Connect the UC Engine or LAN to make a direct or network connection as described in step 1.

NOTE: If a longer cable between the UC Presentation Transmitter and the HD-CONV-USB-250 is needed, use a DigitalMedia™ Ultra cable only. The maximum supported cable length is 300 ft.

7

UC-CX100-T Quick Start

Crestron Flex Advanced Video Conference System Integrator Kit for Microsoft Teams® Rooms

4. Connect the touch screen to the bottom of the UC Presentation Transmitter.

8

UC-CX100-T Quick Start

Crestron Flex Advanced Video Conference System Integrator Kit for Microsoft Teams® Rooms

5. Connect a laptop to either the USB port or both the HDMI and USB B ports on the bottom of the UC Presentation Transmitter. Select a connection type based on the available ports on the user's laptop.

NOTE: If the USB port is used along with either the HDMI or USB B port, the UC Presentation Transmitter will communicate via the USB port by default.

6. Bundle the cables with the integrated cable tie wraps. The cable tie wraps are reusable.

9