Accessory (Select Models Only). Motorola CLP1010, CLP1060, CLP1040
Add to My manuals56 Pages
The Motorola CLP1010 is a compact and lightweight two-way radio, designed for clear communication in various business settings like retail stores, restaurants, and hotels. With its simple design and user-friendly interface, the CLP1010 offers easy operation and efficient communication. The device features a built-in Lithium-Ion battery, providing long-lasting power, and a drop-in tray charger for convenient charging. It also comes with a swivel belt clip holster for flexible carrying options.
advertisement
![Accessory (Select Models Only). Motorola CLP1010, CLP1060, CLP1040 | Manualzz Accessory (Select Models Only). Motorola CLP1010, CLP1060, CLP1040 | Manualzz](http://s3.manualzz.com/store/data/056072802_1-05b9ad25f0ffb6adee6f9984e979b24b-360x466.png)
CONNECTING A BLUETOOTH WIRELESS
ACCESSORY (SELECT MODELS ONLY)
Add Bluetooth Headset (Initial Pairing)
1.
Turn the radio OFF.
2.
Put Bluetooth headset in pairing mode. Refer to your Bluetooth headset instructions leaflet.
3.
Press and hold the PTT button and power button simultaneously until radio shows the blue
LED.
User Mode
Bluetooth
Pairing Mode
Pairing
Successfully
Bluetooth
Disconnected
Pairing Fail/
Timeout
LED Configuration
•
LED Status
Last connection
– Fast blinking blue
• Add or erase/ add – Solid blue
Blue/purple blinks for
5 seconds
Red/purple blinks until the radio reconnects
Red/purple blinks until radio reconnects
Color
Note: The Bluetooth feature is disabled when the wired audio accessory is plugged into the accessory connector on the CLP radio.
Reconnect to Last Connected Bluetooth
Headset
1.
Turn the radio OFF.
2.
Press the power button to turn the radio ON.
(Make sure the Bluetooth headset is turned
ON).
Erase Bluetooth Headset History and Add
Bluetooth Headset
1.
Turn the radio OFF.
2.
Put the Bluetooth headset in pairing mode.
Refer to your Bluetooth headset instructions leaflet.
3.
Press and hold the Menu button and power button simultaneously until radio shows the blue
LED.
Note: The CLP radio uses proximity pairing. Make sure the headset is close enough to the CLP radio.
Pairing process takes about 14 seconds.
5
advertisement
Related manuals
advertisement
Table of contents
- 9 Introduction
- 10 Radio Overview
- 10 Radio Controls
- 11 Getting Started
- 11 Install The Battery
- 12 Connecting a Wired Audio Accessory
- 13 Accessory (Select Models Only)
- 13 Add Bluetooth Headset (Initial Pairing)
- 13 Headset
- 13 Bluetooth Headset
- 14 Turning the Radio On and Off
- 14 Adjusting the Volume
- 14 Belt Clip Holster
- 15 Transmitting and Receiving
- 16 Operation with Menu Settings
- 17 Selecting a Channel
- 18 Monitoring a Channel
- 18 Scanning
- 19 Dynamic Talkaround Scan (*)
- 19 Mute Feature (*)
- 19 Talk Permit Tone (*)
- 20 Battery and Charger Features
- 20 Battery Features
- 20 About the Li-Ion Battery
- 21 Battery Recycling and Disposal
- 22 Battery
- 22 Charger
- 23 Charging a Standalone Battery
- 26 Charging the Bluetooth Headset
- 27 Checking Battery Status
- 28 Information
- 29 Operational Safety Guidelines
- 30 the CPS
- 30 Software) CPS
- 33 Radio Cloning
- 33 Cloning Radio Settings
- 33 Cloning Instructions
- 33 (optional accessory)
- 37 Advanced Radio Configuration (*)
- 38 Troubleshooting
- 42 Use and Care
- 43 Radio Frequency and Code Charts
- 47 States and Canada
- 52 Accessories
- 52 Audio Accessories
- 52 Batteries
- 52 Carry Accessories
- 53 Chargers
- 53 Programming Cables