advertisement
Polycom® SpectraLink® 6020 Wireless Handset User Guide
Charger Models
Three charger models are available for the SpectraLink 6020 Wireless Telephone. The Single Charger will charge a single handset with an installed Battery Pack. The Dual Charger will charge the handset and a spare Battery Pack. The Quad Charger can charge up to four Battery Packs at a time.
The Single and Dual Chargers allow the handset to remain operative in speakerphone mode or with a headset while charging. Handsets may be charged while in standby mode, while in an active call or while turned off.
Place the Single or Dual Charger on a flat, horizontal surface. Plug the power supply into the charger and into an appropriate wall outlet. The Quad Charger may be mounted on a horizontal or vertical surface.
Single Charger
The Single Charger is designed to allow the handset to remain operational through speakerphone or headset use while the handset's Battery Pack is being charged. The handset may also be charged while it is in standby mode or turned off.
Place the handset in the Single Charger facing forward. While the handset is charging in standby mode, it will display its extension number and Charging …. An animated charge icon will indicate that charging is in progress. The handset is fully operational and will ring if called. When the handset is charging while turned off, only Charging … will display and no calls will be received. The dots will be racing during the charging cycle.
When the handset is fully charged, Charge Complete will display.
No charging information will display during an active call.
October, 2011 | 1725-36729-001_D.docx 18
advertisement