Inserting the Battery Pack. Canon D30

Inserting and Removing the Battery Pack

Inserting the Battery Pack

Load a fully charged BP-511 battery pack into the camera.

1

Open the battery chamber cover.

● Slide the lever in the direction shown by the arrow in the diagram, and open the cover as shown.

1

2

Load the battery into the camera.

● Make sure the battery pack is facing the right way, and insert it into the battery chamber.

● Insert the battery pack until it locks into place.

3

Close the cover.

● Press the cover closed until it clicks shut.

Battery Charge Remaining Icons

The level of charge remaining is shown in three stages when the Main Switch is set to

⟨

ON

⟩

.

( → 33)

: Charge is sufficient.

: Charge is low.

: Battery pack must be charged.

If the level of charge remaining runs out when you are using the menu screen or playing back an image, a no battery warning appears on the LCD monitor. When this occurs, remove the battery and charge it.

27