- Computers & electronics
- Print & Scan
- Scanner Transparancy Adapters
- Minolta
- Dimage Scan Elite II
- Instruction manual
About TWAIN drivers and plug-ins. Minolta II, DIMAGE SCAN ELITE, Dimage Scan Elite II, ELITE_II
Add to My manuals100 Pages
advertisement
INSTALLING DRIVER SOFTWARE – WINDOWS
CAUTION
The anti-virus system extensions may conflict with the operation of the software installer. Before installing the scanner utility software, remove or disable any extensions before launching the installer. Replace or re-enable the extensions when the installation is complete.
TIPS
About TWAIN drivers and plug-ins
The scanner can be launched directly from an image-processing application like Adobe
Photoshop Elements. When the scanner utility software is installed in a computer with a Windows operating system, a TWAIN driver is automatically installed with it. Although the TWAIN driver cannot be seen, it allows the utility to be launched from an application as well as allowing the computer and scanner to communicate.
When the scanner utility software is installed on a Macintosh computer, a plug-in file is placed in the scanner utility folder. By simply dragging and dropping the plug-in file into an applications import folder, the scanner utility software can be launched from that application.
98/98SE/2000 PROFESSIONAL/ME/XP
• In the example below, the hard disk is drive C, and the CD-ROM drive is drive D. The letters designating the drives will vary between computers.
1 Turn on the computer to start Windows.
2 Insert the DiMAGE Scan Elite II CD-ROM into the CD-ROM drive.
• The DiMAGE Scan Elite II setup screen will appear.
• To check the contents of the DiMAGE Scan Elite II CD-
ROM, click the “To access the CD-ROM” button.
3 Click the “Starting up the DiMAGE Scan II installer” button.
• The program decompression screen will briefly appear.
The Install Shield Wizard will start automatically.
If the Install Shield Wizard does not start up automatically, execute the following procedure:
1. Initiate the run routine on the start menu.
2. Click “Browse” in the run dialog box.
3. Select the CD-ROM drive (DS Elite II(D:)) from the look-in box in the browse dialog box.
4. Click on or open the driver folder.
5. Click on or open the “English” folder.
6. Click on “Setup.exe.” The file and its location will be displayed in the run dialog box:
D:\Driver\English\Setup.exe. Click “OK”.
• The Install Shield Wizard will appear. Click “Next”.
10
4 Click “Next” to view the license agreement.
Click “Yes” to accept the agreement and continue.
• Read the entire agreement carefully before continuing.
If you do not agree to the terms of the license agreement, click “No” to exit the setup program.
5 To install the software in the default folder
(C:\Program Files\DS_Elite2), click “Next”.
• To install the software in another folder, click “Browse...” to display the folder selection window. Specify the directory in which to install the software, then click “OK”.
6 Select the components to be installed, then click “Next”.
• It is advisable to select all options, all facities will then be available for use in future.
7 The name of the default program folder is displayed. To install the software icons in this folder, click “Next”.
• To install the software icons to another existing folder, select one of the folders listed in the existing-folders box below. Click “Next>” to begin installation.
8 The Install Shield Wizard will indicate that installation was successful. Check “Yes, I want to restart my computer now.” and then click “Finish”.
• When the computer restarts, the scanner driver software will be ready to use.
11
advertisement
Related manuals
advertisement
Table of contents
- 4 BEFORE YOU BEGIN
- 6 FOR PROPER AND SAFE USE
- 8 GETTING STARTED
- 10 About TWAIN drivers and plug-ins
- 10 2000 Professional/Me/XP
- 12 Macintosh
- 14 ELEMENTS
- 14 2000 Professional/Me/XP
- 17 Macintosh
- 19 NAMES OF PARTS
- 19 CONNECTING THE AC ADAPTOR
- 20 IEEE 1394 cable
- 20 USB cable
- 21 Disconnecting the cable with Windows
- 22 EASY SCAN UTILITY
- 22 Windows
- 22 Macintosh
- 23 LOADING THE FILM HOLDER
- 23 Loading the 35mm film holder – FH-U
- 24 (sold separately)
- 25 INSERTING THE FILM HOLDER
- 26 Inserting the APS Adaptor AD
- 26 SPECIFYING THE FILM TYPE
- 27 MAKING AN INDEX SCAN
- 27 SCANNED
- 27 IMAGE
- 28 CESSING
- 28 SETTINGS
- 28 10. SCANNING AND SAVING THE IMAGE
- 29 Turning off the scanner
- 30 STANDARD SCAN UTILITY
- 31 UTILITY
- 31 SCAN UTILITY
- 31 Elements
- 31 Launching the utility software
- 32 SCAN UTILITY
- 32 Photoshop Elements
- 32 Launching the utility software
- 33 2. SETTING UP THE SCANNER
- 33 MAIN WINDOW
- 36 3. LOADING THE FILM HOLDER
- 37 5. INDEX SCAN
- 37 INDEX TAB
- 38 MAKING AN INDEX SCAN
- 38 RESIZING THE UTILITY WINDOW
- 38 SELECTING INDEX THUMBNAILS
- 39 FRAMES
- 40 FIT-TO-WINDOW BUTTON
- 40 REVERSING THE FRAME ORDER
- 40 SAVING THE INDEX THUMBNAILS
- 41 SAVING AN INDEX FILE
- 41 LOADING AN INDEX FILE
- 42 6. MAKING A PRESCAN
- 42 PRESCAN TAB
- 43 MAKING A PRESCAN
- 43 CROPPING THE IMAGE
- 43 Auto cropping
- 44 Manual cropping
- 45 IMAGE
- 45 FIT-TO-WINDOW BUTTON
- 47 ZOOMING
- 47 GRAB BUTTON
- 48 AUTO EXPOSURE
- 48 AE area selection
- 49 AE lock
- 49 POINT AF (AUTOFOCUS)
- 50 MANUAL FOCUS
- 51 CROPPING APS IMAGES
- 51 WINDOW
- 51 Frame number
- 51 RGB display
- 52 7. IMAGE CORRECTION
- 52 IMAGE CORRECTION TAB
- 53 TONE CURVES AND HISTOGRAM
- 54 RGB and CMYK
- 54 COMPLEMENTARY COLOUR
- 54 CHANNEL
- 55 CHANGING THE TONE CURVES
- 55 FREEHAND
- 56 RECTIONS
- 56 About the tone curve
- 56 Bringing out detail in the shadows
- 57 Increasing the contrast of an image
- 57 Correcting colour with tone curves
- 58 RECTIONS
- 60 HISTOGRAM CORRECTION
- 60 Auto setting
- 60 Manual setting
- 61 Colour corrections with the histogram
- 62 CORRECTIONS
- 62 Auto setting
- 63 CORRECTIONS
- 63 Auto setting
- 64 VARIATION CORRECTIONS
- 64 Colour-balance variation
- 64 Brightness & Contrast variation
- 65 Saturation variation
- 66 UNSHARP MASK
- 67 Undoing an image correction
- 67 Redoing a cancelled image correction
- 67 Resetting all image corrections
- 67 MAKING SNAPSHOT THUMBNAILS
- 68 CORRECTIONS
- 68 Saving an image-correction Job
- 68 Loading an image-correction Job
- 68 IMAGES
- 69 CORRECTIONS
- 69 REQUIREMENTS
- 70 DIGITAL ICE
- 71 DIGITAL ROC
- 72 DIGITAL GEM
- 74 8. SCAN SETTINGS
- 74 SCAN-SETTING DIALOG BOX
- 75 USING JOB FILES
- 76 Job Categories
- 77 MANUALLY
- 78 Resolution and output size
- 78 setting the scanner output by pixels
- 79 size and output resolution
- 80 SAVING A JOB FILE
- 80 DELETING A JOB FILE
- 81 9. MAKING THE FINAL SCAN
- 81 cessing application
- 81 When using the utility software only
- 82 File types
- 83 CUSTOM WIZARD
- 85 Quitting the Standard Scan Utility
- 86 APPENDIX
- 86 IEEE 1394 AND USB INTERFACES
- 86 IEEE 1394 AND USB
- 86 AND SCANNER ON
- 87 Windows Me
- 88 COLOUR MATCHING
- 89 OUTPUT COLOUR SPACE
- 91 Scanner colour profiles
- 92 INSTALLED FILES AND FOLDERS
- 93 JOB FILE LIST
- 93 35mm film
- 95 TECHNICAL SPECIFICATIONS
- 96 TROUBLESHOOTING
- 97 USER TECHNICAL SUPPORT
- 98 INDEX