- Computers & electronics
- Print & Scan
- Scanner Transparancy Adapters
- Minolta
- Dimage Scan Elite II
- Instruction manual
Saturation variation. Minolta II, DIMAGE SCAN ELITE, Dimage Scan Elite II, ELITE_II
Add to My manuals100 Pages
advertisement
BRIGHTNESS & CONTRAST VARIATION
Eight images with a slight correction to brightness and contrast are displayed around a thumbnail of the uncorrected prescan image.
1 Drag the variation-step slider, or enter the correction step into the variation-step text box to set the degree of correction.
• The initial setting is 10. The step can be set between 1 and 20.
• Checking the display-limit check box will indicate when any of the image values exceed 0
(black limit) or 255 (white limit) with the complementary colour. For example, if the white area of the image exceeds those values, the limit is displayed in the complementary colour, black.
2 Click the best image among the eight frames.
• The selected image becomes the new centre showing eight new images corrected by the designated step. This procedure can be repeated until the desired correction is obtained.
• Click the reset button to cancel any changes.
• Changes will be reflected in the prescan image.
SATURATION VARIATION
Two images with a slight saturation correction are displayed on each side of a thumbnail of the uncorrected prescan image.
1 Drag the variation-step slider, or enter the correction step into the variation-step text box to set the degree of correction.
• The initial setting is 10. The step can be set between 1 and 20.
• Checking the display-limit check box will indicate when any of the image values exceed 0
(black limit) or 255 (white limit) with the complementary colour.
2 Click the best image among the two frames.
• The selected image becomes the new centre showing two new images corrected by the designated step. This procedure can be repeated until the desired correction is obtained.
• Click the reset button to cancel any changes.
• Changes will be reflected in the prescan image.
65
advertisement
Related manuals
advertisement
Table of contents
- 4 BEFORE YOU BEGIN
- 6 FOR PROPER AND SAFE USE
- 8 GETTING STARTED
- 10 About TWAIN drivers and plug-ins
- 10 2000 Professional/Me/XP
- 12 Macintosh
- 14 ELEMENTS
- 14 2000 Professional/Me/XP
- 17 Macintosh
- 19 NAMES OF PARTS
- 19 CONNECTING THE AC ADAPTOR
- 20 IEEE 1394 cable
- 20 USB cable
- 21 Disconnecting the cable with Windows
- 22 EASY SCAN UTILITY
- 22 Windows
- 22 Macintosh
- 23 LOADING THE FILM HOLDER
- 23 Loading the 35mm film holder – FH-U
- 24 (sold separately)
- 25 INSERTING THE FILM HOLDER
- 26 Inserting the APS Adaptor AD
- 26 SPECIFYING THE FILM TYPE
- 27 MAKING AN INDEX SCAN
- 27 SCANNED
- 27 IMAGE
- 28 CESSING
- 28 SETTINGS
- 28 10. SCANNING AND SAVING THE IMAGE
- 29 Turning off the scanner
- 30 STANDARD SCAN UTILITY
- 31 UTILITY
- 31 SCAN UTILITY
- 31 Elements
- 31 Launching the utility software
- 32 SCAN UTILITY
- 32 Photoshop Elements
- 32 Launching the utility software
- 33 2. SETTING UP THE SCANNER
- 33 MAIN WINDOW
- 36 3. LOADING THE FILM HOLDER
- 37 5. INDEX SCAN
- 37 INDEX TAB
- 38 MAKING AN INDEX SCAN
- 38 RESIZING THE UTILITY WINDOW
- 38 SELECTING INDEX THUMBNAILS
- 39 FRAMES
- 40 FIT-TO-WINDOW BUTTON
- 40 REVERSING THE FRAME ORDER
- 40 SAVING THE INDEX THUMBNAILS
- 41 SAVING AN INDEX FILE
- 41 LOADING AN INDEX FILE
- 42 6. MAKING A PRESCAN
- 42 PRESCAN TAB
- 43 MAKING A PRESCAN
- 43 CROPPING THE IMAGE
- 43 Auto cropping
- 44 Manual cropping
- 45 IMAGE
- 45 FIT-TO-WINDOW BUTTON
- 47 ZOOMING
- 47 GRAB BUTTON
- 48 AUTO EXPOSURE
- 48 AE area selection
- 49 AE lock
- 49 POINT AF (AUTOFOCUS)
- 50 MANUAL FOCUS
- 51 CROPPING APS IMAGES
- 51 WINDOW
- 51 Frame number
- 51 RGB display
- 52 7. IMAGE CORRECTION
- 52 IMAGE CORRECTION TAB
- 53 TONE CURVES AND HISTOGRAM
- 54 RGB and CMYK
- 54 COMPLEMENTARY COLOUR
- 54 CHANNEL
- 55 CHANGING THE TONE CURVES
- 55 FREEHAND
- 56 RECTIONS
- 56 About the tone curve
- 56 Bringing out detail in the shadows
- 57 Increasing the contrast of an image
- 57 Correcting colour with tone curves
- 58 RECTIONS
- 60 HISTOGRAM CORRECTION
- 60 Auto setting
- 60 Manual setting
- 61 Colour corrections with the histogram
- 62 CORRECTIONS
- 62 Auto setting
- 63 CORRECTIONS
- 63 Auto setting
- 64 VARIATION CORRECTIONS
- 64 Colour-balance variation
- 64 Brightness & Contrast variation
- 65 Saturation variation
- 66 UNSHARP MASK
- 67 Undoing an image correction
- 67 Redoing a cancelled image correction
- 67 Resetting all image corrections
- 67 MAKING SNAPSHOT THUMBNAILS
- 68 CORRECTIONS
- 68 Saving an image-correction Job
- 68 Loading an image-correction Job
- 68 IMAGES
- 69 CORRECTIONS
- 69 REQUIREMENTS
- 70 DIGITAL ICE
- 71 DIGITAL ROC
- 72 DIGITAL GEM
- 74 8. SCAN SETTINGS
- 74 SCAN-SETTING DIALOG BOX
- 75 USING JOB FILES
- 76 Job Categories
- 77 MANUALLY
- 78 Resolution and output size
- 78 setting the scanner output by pixels
- 79 size and output resolution
- 80 SAVING A JOB FILE
- 80 DELETING A JOB FILE
- 81 9. MAKING THE FINAL SCAN
- 81 cessing application
- 81 When using the utility software only
- 82 File types
- 83 CUSTOM WIZARD
- 85 Quitting the Standard Scan Utility
- 86 APPENDIX
- 86 IEEE 1394 AND USB INTERFACES
- 86 IEEE 1394 AND USB
- 86 AND SCANNER ON
- 87 Windows Me
- 88 COLOUR MATCHING
- 89 OUTPUT COLOUR SPACE
- 91 Scanner colour profiles
- 92 INSTALLED FILES AND FOLDERS
- 93 JOB FILE LIST
- 93 35mm film
- 95 TECHNICAL SPECIFICATIONS
- 96 TROUBLESHOOTING
- 97 USER TECHNICAL SUPPORT
- 98 INDEX